Abstract:Phase change heat transfer in micro heat sink was an effective method to solve the thermal issues of high heat flux micro devices. The geometric structure modification of the micro heat sink could enhance its heat transfer performance obviously. In this paper, a microchannel with triangular cavities and rectangular fins (Tri.C-Rec.F) was fabricated for the purpose of flow boiling improvement. Flow boiling experiments were carried out using pure acetone with a fixed inlet temperature of 29 °C at four mass fluxes 83 kg/(m2⋅s), 147 kg/(m2⋅s), 324 kg/(m2⋅s) and 442 kg/(m2⋅s), effective heat flux ranging from 0 to 101 W/cm2. The flow boiling characteristics of the microchannel Tri.C-Rec.F were studied and compared with those of the conventional rectangular microchannel (R). The physics behind the flow boiling process and the heat transfer enhancement mechanisms of the micro heat sink were explored. Experimental results indicated that the microchannel Tri.C-Rec.F showed significant enhanced heat transfer, reduced onset of nucleate boiling (ONB), and delayed critical heat flux (CHF) compared to the microchannel R because of the increased bubble nucleation and the particular flow boiling phenomena. Moreover, the modified microchannel improved the flow boiling stability distinctly for high mass fluxes. The continuously developing liquid film could enhance the liquid film evaporation, maintain the liquid supplement and prevent partial dryout effectively. The flow disturbance effect of the micro structures and the bubble breaking effect of the micro fins promoted bubble departure and mitigated the flow reversal. The microchannel Tri.C-Rec.F presented a remarkable higher heat transfer coefficient than microchannel R with a maximum increment of 300% and 51.6% at G = =83 and 442 kg/(m2⋅s), respectively. The acceleration, disturbance and separation effects of the micro fins increased the pressure drop, which could be improved by further structural optimization.

Silicon microchannels flow boiling enhanced via microporous decorated sidewalls

Theoretical and Experimental Research on Flow Boiling Heat Transfer in Microchannels for IGBT Modules

Flow Boiling in Microchannels Enhanced by Parallel Microgrooves Fabricated on the Bottom Surfaces

Effects of Heat Flux, Mass Flux and Two-Phase Inlet Quality on Flow Boiling in a Vertical Superhydrophilic Microchannel

High-frequency Alternating Nucleate Boiling of Water Enabled by Microslot Arrays in Microchannels

Flow Boiling in Vertical Narrow Microchannels of Different Surface Wettability Characteristics

Enhanced flow boiling in microchannels integrated with supercapillary pinfin fences

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel

Experimental investigations into flow boiling heat transfer in a micro-channel with hybrid of fin and porous coating structure

Enhancement of Flow Boiling Heat Transfer in Microchannel Using Micro-Fin and Micro-Cavity Surfaces

Experimental investigation of flow boiling characteristics in microchannel with triangular cavities and rectangular fins

Micro-pin-finned Surfaces with Fractal Treelike Hydrophilic Networks for Flow Boiling Enhancement

Enhanced heat transfer coefficient of flow boiling in microchannels through expansion areas

Experimental investigation of two-phase heat transfer in saw-tooth copper microchannels

Flow boiling characteristics in a novel type of sinusoidal wavy microchannels with stepped expansion flow passages

Pool boiling inside micro-nano composite pores: Thermofluids behaviors and heat transfer enhancement

Local Heat Transfer of Saturated Flow Boiling in Vertical Narrow Microchannel

Favourably regulating two-phase flow regime of flow boiling HFE-7100 in microchannels using silicon nanowires

Augmentation of Flow Boiling Critical Heat Flux along Microchanneled Surfaces

Enhancing the Critical Heat Flux Using Microchanneled Surfaces

Effects of Heat Flux, Mass Flux, Inlet Fluid Subcooling, and Channel Orientation on Subcooled Flow Boiling in a High-Aspect-Ratio Rectangular Microchannel