Abstract:Facile surface micro/nanostructuring techniques for additively-manufactured (AM) aluminum alloy (AlSi10Mg) have recently been developed. The structuring techniques are not only highly scalable, but they also enable the tailoring of structure length scale and morphology to enhance pool boiling heat transfer coefficient. Our past study revealed that the structure cavity size of 5 μm is favorable for bubble nucleation during pool boiling of dielectric fluid, HFE-7100, resulting in significant enhancements in the heat transfer coefficients ( h ). However, owing to the differences in thermophysical properties between different coolant fluids, including saturation temperature, latent heat of vaporization and surface tension, the required structure size range for bubble nucleation and capillary wicking force for liquid re-supply are expected to differ significantly. To explore the effect of structure length scale on the pool boiling performance of coolants with different thermophysical properties, this work develops a new surface structuring technique consisting of a dual-stage metallurgic heat treatment process and single-stage crystallographic etching process to tune the structure length scale across nearly two orders of magnitude, viz. , from 0.3 to 15 μm. Using coolant media of vastly different thermophysical properties, i.e., dielectric fluid HFE-7100 and deionized water, we show that while microcavities with sizes ranging from 3 to 8 μm are favorable bubble nucleation sites for boiling of HFE-7100, which result in the enhancement of the maximum heat transfer coefficient ( h max ) by 83.4 to 103.8 % as compared to a conventional plain Al6061 surface, larger microcavity sizes of 10 to 15 μm are required to effectively promote bubble nucleation of water. This large microcavity size range of 10 to 15 μm, produced through rational nanoparticle agglomeration of the rich Si-phase in AM AlSi10Mg in elevated temperature, followed by an indirect removal process using a chemical process, is found to significantly increase h max of water by up to 259.9 % as compared to conventional nanostructures formed on Al6061. In addition, the new AM structured surfaces also exhibit up to 26.6 % enhancement in critical heat flux (CHF) as compared to highly-wicking conventional nanostructured Al6061. In summary, by utilizing scalable fabrication techniques to tailor the structure length scale on AM AlSi10Mg, this work not only reveals the favorable microcavity sizes for bubble nucleation of different coolant fluids to enhance boiling, but it also provides useful micro/nanostructure design guidelines that can be adopted to enhance boiling of other coolants and phase change applications.

A review on fabrication and pool boiling enhancement of three-dimensional complex structures

A Review of Pool-Boiling Processes Based on Bubble-Dynamics Parameters

Multiscale hybrid surface structure modifications for enhanced pool boiling heat transfer: State-of-the-art review

Performance of Pool Boiling with 3D Grid Structure Manufactured by Selective Laser Melting Technique

A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks

Three-Tier Hierarchical Structures for Extreme Pool Boiling Heat Transfer Performance

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Pool Boiling Performance of 3D-Printed Reentrant Microchannels Structures

An Overview of the Recent Advances in Pool Boiling Enhancement Materials, Structrure, and Devices

Review of surface modification in pool boiling application: Coating manufacturing process and heat transfer enhancement mechanism

Review of pool and flow boiling heat transfer enhancement through surface modification

Review of Two Types of Surface Modification on Pool Boiling Enhancement: Passive and Active

An All-Metal Hollow Microstructure for Pool-Boiling Chip-Integrated Cooling Based on Electroplating

The synergistic effect of micro/nanostructure length scale and fluid thermophysical properties on pool boiling heat transfer

Progress in enhanced pool boiling heat transfer on macro- and micro-structured surfaces

Enhancement of Pool Boiling Heat Transfer Using 3D-Printed Groove Structure

Bottom-up Design of Micro-/Nano Hierarchical Surface for the Enhancement of Boiling Heat Transfer Performance: A Review

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling

A review of numerical investigation on pool boiling

Recent Advances in the Critical Heat Flux Amelioration of Pool Boiling Surfaces Using Metal Oxide Nanoparticle Deposition

Pool boiling heat transfer of dual-scale porous microchannel for high-power electronics cooling