Experimental study of flow boiling performance of open-ring pin fin microchannels

Daxiang Deng,Long Zeng,Wei Sun,Guang Pi,Yue Yang

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120829

IF: 5.2

2021-03-01

International Journal of Heat and Mass Transfer

Abstract:<p>A type of open-ring pin fin microchannels (ORPFM) was proposed and developed for advanced microchannel heat sinks. They consist of an internal cavity for bubble nucleation and two inner small and outside large rings with separated and converged flow passages. Two arrangements of open-ring pin fins, inline and staggered ones, were prepared and compared for optimization. Flow boiling experiments were performed to assess the two-phase boiling performance of both inline and staggered ORPFM. Tests were conducted using subcooled deionized water with an inlet subcooling of 10°C and mass fluxes of 200 kg/m²·s and 300 kg/m²·s. Two-phase boiling heat transfer performance, pressure drop and two-phase flow instabilities of the ORPFM were systematically explored. Experimental results indicated that both inline and staggered ORPFM samples presented a small wall superheat of 1-2°C for onset of nucleate boiling (ONB). Nucleate boiling, both nucleate boiling and thin film evaporation, and convective boiling in turn dominated with increasing heat flux and vapor quality for ORPFM. The inline ORPFM generally presented a 10% to 80% augmentation in boiling heat transfer at moderate and high heat fluxes, a 2%-20% smaller pressure drop, and more stable flow boiling process with a mitigation of two-phase flow instabilities than the staggered one. Therefore, the inline ORPFM seemed to be more favorable for high heat flux dissipation of advanced microchannel heat sinks.</p>

engineering, mechanical,thermodynamics,mechanics

What problem does this paper attempt to address?

The paper primarily focuses on studying the performance of a novel open-ring pin fin microchannel (ORPFM) in terms of boiling heat transfer. This new microchannel structure includes an internal cavity for bubble generation and features two annular structures with smaller inner and larger outer diameters, forming separated and converging flow paths. The paper experimentally compares two arrangement methods—aligned and staggered—of the open-ring pin fin microchannel.

The main issues addressed include:
1. **Design and Optimization**: Proposing and developing a novel open-ring pin fin microchannel structure, and experimentally comparing two different pin fin arrangement methods (aligned and staggered) to optimize the microchannel design.
2. **Boiling Performance Evaluation**: Experimentally evaluating the two-phase boiling heat transfer performance, pressure drop, and fluid instability characteristics of these two new microchannels under different operating conditions.
3. **Enhanced Heat Transfer Effect**: Aiming to improve the cooling efficiency of high-power microelectronic devices, optical devices, etc., by improving the microchannel structure to solve their heat dissipation problems.

Experimental results show that at higher heat fluxes, the aligned ORPFM improves boiling heat transfer enhancement by 10% to 80% compared to the staggered arrangement, reduces pressure drop by 2% to 20%, and also exhibits a more stable boiling process, reducing two-phase flow instability. Therefore, for advanced microchannel heat sinks requiring efficient heat dissipation, the aligned ORPFM is more advantageous.