Abstract:Cu-Ni-Si alloy has good electrical conductivity, thermal conductivity, high strength, and high hardness, and is widely used in electronic components and other fields. When the compositions of the Cu-Ni-Si alloy are designed, the determination of the phase component is critical. In this work, the composition of Cu-Ni-Si alloy is designed according to the "precipitation phase" by cluster-plus-glum-atom model. Following the cluster selection criteria, the delta-Ni2Si, gamma-Ni5Si2 and beta-Ni3Si phase clusters are determined, respectively, and the corresponding cluster formulas are [Ni-Ni8Si5]Ni,[Si-Ni-10]Si-3, and [Si-Ni-12]Si-3. the compositions of a series of Cu-Ni-Si alloys are designed according to the different precipitated phases of delta-Ni2Si, gamma-Ni5Si2, and beta-Ni3Si each with Cu atom content being 93.75%, 95%, 95.8%, 96.7% and 97.5%, respectively. The alloy raw material is melted into alloy ingot in an argon-filled vacuum arc furnace. The ingots undergoes solid-solution at 950 degrees C for 1 hour and water quenching then aging treatment at 450 degrees C for 4 hour and water quenching. The conductivity and Vickers hardness of the alloy are tested by conductivity meter and hardness meter, respectively. The microstructure of the alloy is characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). In general, the electrical conductivity of Cu-Ni-Si is the main consideration in the design of alloy composition, the content values of matrix Cu atoms are in the ranges of 90%-95.63% and 95.63%-97.5% respectively, the precipitated phases are designed according to delta-Ni2Si and gamma-Ni5Si2 respectively; the content of matrix Cu atoms is over 97.5%, it can be designed according to any phase of delta-Ni2Si, gamma-Ni3Si, and beta-Ni5Si2, with no difference in electrical conductivity among them. If the strength of the alloy is the main factor in the composition design, the content values of Cu atoms in the matrix are in the ranges of 90% - 93.93%, 93.93% - 94.34%, 94.34% - 95.63%, and 95.63%-96.12% respectively, according to the composition intervals the precipitated phases are designed as delta-Ni2Si, gamma-Ni5Si2, and beta-Ni3Si, respectively. Once the content of Cu in the matrix is greater than 96.12%, the precipitated phase can be designed according to any of the phases of delta-Ni2Si, gamma-Ni5Si2 and beta-Ni3Si.

Phase-composition design of high-hardness and high-electric-conductivity Cu-Ni-Si Alloy

Effects of Co/Si Atomic Ratio on Hardness and Electrical Conductivity of Cu-Co-Si Alloys

Calculation of Cu-Rich Part of Cu-Ni-Si Phase Diagram

Effects of Co/Si atomic ratio on hardness and electrical conductivity of Cu‐Co‐Si Alloys

Revealing the Effect of Phase Composition and Transformation on the Mechanical Properties of a Cu–6Ni–6Sn–0.6Si Alloy

Accelerated discovery of high-performance Cu-Ni-Co-Si alloys through machine learning

Customized development of promising Cu-Cr-Ni-Co-Si alloys enabled by integrated machine learning and characterization

Simultaneously enhanced hardness and electrical conductivity in a Cu–Ni–Si alloy by addition of Cobalt

High strength, high conductivity and good softening resistance Cu-Fe-Ti alloy

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

A High-Throughput Search for Composition–Phase–Property Relations of Cu–Ni/Ti–Al Elastic Copper Alloys

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

First-principles study on the high-strength and high-conductivity modification mechanism of C7035 copper alloy by Ni, Si, and Co solid solution

Effect of Δ-Al3cuni Phase and Thermal Exposure on Microstructure and Mechanical Properties of Al-Si-Cu-Ni Alloys

Precipitates-Strengthened Cu-Ni-Si-Fe Conductive Copper Alloy

Design Multicomponent Eutectic Alloys in the Co–Cr–Fe–Ni–Nb System Using Simple Mixing Method

Tailoring Formation and Proportion of Strengthening Phase in Non-Equiatomic CoCrFeNi High Entropy Alloy by Alloying Si Element

Hierarchical phase separation behavior in a Ni-Si-Fe alloy

A novel precipitation‐strengthened conductive copper alloy: Cu‐Hf‐Si alloy

Investigation of Microstructure and Wear Properties of Precipitates-Strengthened Cu-Ni-Si-Fe Alloy.