Abstract:In order to investigate the effects of matrix solid solution, precipitate phases, and microscale interfaces on the mechanical and electrical properties of copper alloys, we employed first-principles calculations based on density functional theory study aimed to understand how alloying elements enhance the strength and conductivity of copper. The results demonstrated that doping Co atoms into the copper matrix using the Dop2 structure model exhibited the most significant improvement in both mechanical and electrical properties. The Young's modulus was doubled compared to pure copper, and the hardness increased several times. The electrical conductivity reached 59.8 % of the International Annealed Copper Standard (IACS), showing a 6.6 % enhancement compared to Si doping. To validate computational results, we conducted experiments that confirmed the accuracy of the predicted mechanical and electrical properties. Furthermore, the introduction of Co effectively reduced electron losses at the interface between the precipitate phase and the copper matrix. The electron transmission rate through the Co 2 Si (211)/Cu (111) interface reached 78.6 %, representing a 94.1 % improvement compared to the Ni 2 Si (111)/Cu (111) interface. In conclusion, Co can simultaneously enhance the mechanical and electrical properties of Cu–Ni–Si alloys, providing theoretical guidance for the design and fabrication of high-strength and high-conductivity copper alloys.

Precipitates-Strengthened Cu-Ni-Si-Fe Conductive Copper Alloy

Investigation of Microstructure and Wear Properties of Precipitates-Strengthened Cu-Ni-Si-Fe Alloy.

Accelerating Discontinuous Precipitation to Increase Strength by Pre-Deformation in Cu-Ni-Si Alloys

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

A novel precipitation‐strengthened conductive copper alloy: Cu‐Hf‐Si alloy

First-principles study on the high-strength and high-conductivity modification mechanism of C7035 copper alloy by Ni, Si, and Co solid solution

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

Microstructure and Precipitate's Characterization of the Cu-Ni-Si-P Alloy

Progress in Research on Nanoprecipitates in High-Strength Conductive Copper Alloys: a Review

Microstructural evolution and properties of a Cu-Fe-Mn-P alloys with high strength and high conductivity

Excellent Mechanical Properties and High Electrical Conductivity of Cu-Co-Si-Ti Alloy Due to Multiple Strengthening

High strength, high conductivity and good softening resistance Cu-Fe-Ti alloy

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: A review

Simultaneously enhancing the strength and electrical conductivity of Cu-Ni-Sn alloy through plastic deformation of an intermetallic compound

Effect of Thermomechanical Processing on the Microstructure and Properties of a Cu-Fe-P Alloy

Abnormally high work hardening ability and excellent comprehensive properties of copper alloys due to multiple twins and precipitates

Effects of Co/Si Atomic Ratio on Hardness and Electrical Conductivity of Cu-Co-Si Alloys

Study on high-strength and high-conductivity Cu–Fe–P alloys

Enhanced mechanical and damping properties of Cu-Modified Al-Ni eutectic alloys: Solid-solution and precipitation hardening effects