Abstract:The majority of studies on high-reliability solder alloys have focused on the six-element system of Sn, Ag, Cu, Bi, Sb, and Ni. However, there is limited research on the influence of Co element within this system. In this study, a Sn3.0Ag0.5CuBiSbNixCo (x = 0 wt%, 0.02 wt%, 0.05 wt%, 0.08 wt%, 0.1 wt%) alloy (referred to as SACBSN-xCo alloy) was prepared using a melting method. The mechanical properties of SACBSN-xCo alloy solder joints were evaluated through ultimate shear strength testing. The composition analysis of the alloy, phase composition examination, intermetallic compound (IMC) investigation and interfacial layer morphology analysis were conducted using ICP, XRD, SEM and EDS techniques respectively. Furthermore, the evolution process of solder structure and solder joint interface layer under different aging times was observed in detail. Results indicate that with the addition of Co element in the alloy solder system two heat release peaks appear during the solidification process; specifically when adding 0.05 wt% Co element content to the mixture it reduces supercooling degree by 15.17 °C to only 1.03 °C; Moreover wettability improvement can be achieved to some extent when adding either 0.02 wt% or 0.05 wt% Co content. The addition of trace Co can inhibit the excessive growth of IMC in the solder alloy matrix and refine the alloy structure. It can promote the growth of Cu 6 Sn 5 -based IMCs and inhibit the growth of Cu 3 Sn layer in intermetallic compound layer (IMCs). In addition, the mechanical properties and thermal fatigue stability of the solder joints are steadily improved by Co element. After adding Co element, the shear strength of the alloy solder joint is increased by about 14.84 %. After aging at 150 °C for 25 days, the shear strength of SACBSN-xCo alloy solder joints is increased by about 20.4 %, which significantly improves the thermal fatigue stability of the solder joints after high temperature aging treatment. The results show that when Co content is 0.05 wt%, the alloy solder has better comprehensive properties.

Effects of Co/Si atomic ratio on hardness and electrical conductivity of Cu‐Co‐Si Alloys

Effects of Co/Si Atomic Ratio on Hardness and Electrical Conductivity of Cu-Co-Si Alloys

Effect of Co Addition on the Phase Structure and Magnetic Properties of Fe-Si-Al Alloys

Effect of Co addition on hardness and electrical conductivity of Cu–Si alloys

Effects of Co Addition on the Microstructure and Properties of Elastic Cu-Ni-Si-Based Alloys for Electrical Connectors

Simultaneously enhanced hardness and electrical conductivity in a Cu–Ni–Si alloy by addition of Cobalt

Simultaneously Enhanced Hardness and Electrical Conductivity in a Cu-Co-Si Alloy by Optimizing Solid Solution Treatment

First-principles study on the high-strength and high-conductivity modification mechanism of C7035 copper alloy by Ni, Si, and Co solid solution

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

Effects of Si addition on properties and microstructure of CuCrZr alloy

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

Effect of Co on microstructures and mechanical properties for Nb-Si based in-situ composites

Effect of Co on microstructure evolution and thermal fatigue stability of lead-free solder alloys of SACBSN series

Effects of Co Alloying and Size on Solidification and Interfacial Reactions in Sn-57 Wt.%bi-(Co)/cu Couples

Investigation of Microstructure and Wear Properties of Precipitates-Strengthened Cu-Ni-Si-Fe Alloy.

Effects of Cr addition on the constitutive equation and precipitated phases of copper alloy during hot deformation

Effects of Si addition on mechanical, electrical and magnetic property of Cu-10Fe alloy

Effect of Co on Solidification Characteristics and Microstructural Transformation of Nonequilibrium Solidified Cu-Ni Alloys

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition