Preparing High-Purity Iron by Direct Reduction‒smelting Separation of Ultra-High-grade Iron Concentrate

Feng Li,Qing-jie Zhao,Man-sheng Chu,Jue Tang,Zheng-gen Liu,Jia-xin Wang,Sheng-kang Li
DOI: https://doi.org/10.1007/s12613-019-1959-6
2020-01-01
International Journal of Minerals Metallurgy and Materials
Abstract:A new process for preparing high-purity iron(HPI) was proposed, and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C, reduced time of 5 h, and Ca O content of 2.5 wt%, a DRI with a metallization rate of 96.5% was obtained through coal-based direct reduction of ultra-high-grade iron concentrate. Then, an HPI with a Fe purity of 99.95% and C, Si, Mn, and P contents as low as 0.0008 wt%, 0.0006 wt%, 0.0014 wt%, and 0.0015 wt%, respectively, was prepared by smelting separation of the DRI using a smelting temperature of 1625°C, smelting time of 45 min, and Ca O content of 9.3 wt%. The product of the pilot test with a scale of 0.01 Mt/a had a lower impurity content than the Chinese industry standard. An HPI with a Fe purity of 99.98 wt%can be produced through the direct reduction-smelting separation of ultra-high-grade iron concentrate at relatively low cost. The proposed process shows a promising prospect for application in the future.
What problem does this paper attempt to address?