Abstract:A novel hybrid interferometer sensor composed of a tapered seven-core fiber (TSCF) and a polydimethylsiloxane (PDMS) cap at the end face of a TSCF is proposed for simultaneous measurement of temperature and gas pressure. TSCF forms a Michelson interferometer (MI), and the PDMS cap on the end surface of TSCF forms a Fabry-Perot interferometer (FPI). The sensing head consisted of a cascade of MI and FPI. When the external temperature or gas pressure changes, owing to the thermal effect or elastic deformation of PDMS, the interference spectrum of the FPI shifts significantly, so the FPI is very sensitive to temperature and gas pressure. MI, which is made of quartz optical fibers, is sensitive only to temperature and is not sensitive to gas pressure. The experimental results show that FPI has a temperature sensitivity of -0.22 nm/°C in the temperature range of 40 °C to 80 °C, and a gas pressure sensitivity of -2.27 nm/MPa in the gas pressure range of 0 to 0.3 MPa. MI has a temperature sensitivity of 0.05 nm/°C in the temperature range of 40 °C to 80 °C, and a gas pressure sensitivity of zero in the gas pressure range of 0 to 0.3 MPa. Using the temperature and gas pressure sensitivities of FPI and MI to construct a measurement matrix, it is possible to simultaneously measure temperature and gas pressure, eliminating their cross-sensitivity. This sensor has the comprehensive advantages of compact structure, small size, easy manufacturing, low cost, high reliability, and high sensitivity, and is expected to be applied in industrial practice.

PDMS-coated fiber optic interferometer based on no-core fiber for multi-parameter measurements

PDMS-coated No-Core Fiber Interferometer with Enhanced Sensitivity for Temperature Monitoring Applications

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

The Polydimethylsiloxane Coated Fiber Optic for All Fiber Temperature Sensing Based on the Multithin–Multifiber Structure

Multi-parameter Measurement Sensor Based on No-Core Fiber

Multiparameter measurement sensor based on no-core fiber

High-resolution, large-dynamic-range multimode interferometer sensor based on a suspended-core microstructured optical fiber

Interferometric Fiber Optic Surface Plasmon Resonance Sensor for Temperature and Strain Measurement

High-sensitivity temperature sensor based on PDMS-coated photonic crystal fiber interferometer

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

Temperature Fiber Sensor Without Cross Sensitivity Based on the Multi-Thin-no-thin-multi Fiber Coated with PDMS

In-Line Interferometric Temperature Sensor Based on Dual-Core Fiber

Highly sensitive liquid level and temperature sensors based on all-fiber intermodal interferometers

A hybrid interferometer sensor for simultaneous measurement of temperature and gas pressure based on tapered seven-core fiber and PDMS

Microfiber Fabry-Perot interferometer used as a temperature sensor and an optical modulator

A PCF Sensor Design Using Biocompatible PDMS for Biosensing

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

Low-Cost High-Performance Fiber-Optic Ph Sensor Based on Thin-Core Fiber Modal Interferometer