Abstract:A novel hybrid interferometer sensor composed of a tapered seven-core fiber (TSCF) and a polydimethylsiloxane (PDMS) cap at the end face of a TSCF is proposed for simultaneous measurement of temperature and gas pressure. TSCF forms a Michelson interferometer (MI), and the PDMS cap on the end surface of TSCF forms a Fabry-Perot interferometer (FPI). The sensing head consisted of a cascade of MI and FPI. When the external temperature or gas pressure changes, owing to the thermal effect or elastic deformation of PDMS, the interference spectrum of the FPI shifts significantly, so the FPI is very sensitive to temperature and gas pressure. MI, which is made of quartz optical fibers, is sensitive only to temperature and is not sensitive to gas pressure. The experimental results show that FPI has a temperature sensitivity of -0.22 nm/°C in the temperature range of 40 °C to 80 °C, and a gas pressure sensitivity of -2.27 nm/MPa in the gas pressure range of 0 to 0.3 MPa. MI has a temperature sensitivity of 0.05 nm/°C in the temperature range of 40 °C to 80 °C, and a gas pressure sensitivity of zero in the gas pressure range of 0 to 0.3 MPa. Using the temperature and gas pressure sensitivities of FPI and MI to construct a measurement matrix, it is possible to simultaneously measure temperature and gas pressure, eliminating their cross-sensitivity. This sensor has the comprehensive advantages of compact structure, small size, easy manufacturing, low cost, high reliability, and high sensitivity, and is expected to be applied in industrial practice.

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

An ultra-sensitive gas pressure sensor based on tapered fiber coated with PDMS film working at TAP

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

The Polydimethylsiloxane Coated Fiber Optic for All Fiber Temperature Sensing Based on the Multithin–Multifiber Structure

Highly Sensitive Gas Pressure Sensing with Temperature Monitoring Using a Slightly Tapered Fiber with an Inner Micro-Cavity and a Micro-Channel

PDMS-coated No-Core Fiber Interferometer with Enhanced Sensitivity for Temperature Monitoring Applications

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

A hybrid interferometer sensor for simultaneous measurement of temperature and gas pressure based on tapered seven-core fiber and PDMS

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

PDMS-Coated S-Tapered Fiber for Highly Sensitive Measurements of Transverse Load and Temperature

High-temperature fiber-tip pressure sensor

Sensitivity-Enhanced Pressure Sensor With Hollow-Core Photonic Crystal Fiber

Ultra-high sensitivity SPR temperature sensor based on a helical-core fiber

High pressure sensor based on intensity-variation using polymer optical fiber

Ultra-high sensitivity temperature sensor based on PDMS-assisted-cascaded Mach–Zehnder Interferometer

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

High Pressure Sensor Based on Photonic Crystal Fiber for Downhole Application