Abstract:In this study, a new type of structure of optical fiber pressure sensor (OFPS) based on polarization modulation is proposed, which selects a high-birefringence fiber (HBF) as the sensing unit to measure the pressure in the fluid medium. The PM-1550-01 fiber produced by NTK Photonics Inc. is evaluated as the sample in our subject. Firstly, the regularities of birefringence variation on the PM-1550-01 followed by the external pressure load and the ambient temperature are analyzed by the finite element method (FEM). The results show that the pressure sensitivity is 2.05 x 10(-6) RIU/MPa in the pressure range of 0-100 MPa, and the temperature sensitivity is 7.27 x 10(-)(10) RIU/degrees C in the temperature range of 0-100 degrees C. Thus, the pressure-temperature cross-sensitivity is only 0.355 kPa/degrees C in theory. Secondly, the expression of the output light intensity of the introduced OFPS is deduced based on the principles of polarization interference and phase modulation. Combined with simulation results, the measurement ranges of the sensor can be set and adjusted by the length of the sensing unit. Finally, the proposed OFPS is fabricated and external pressure tests within the range of 0-50 MPa are completed. The results show that the pressure sensitivity is approximately 0.145 dB/MPa in the pressure range of 0-44 MPa. There is a fine consistency between the experimental data and simulation results. In addition, the proposed OFPS has many other advantages, such as small size, simple fabrication process and large measurement range, which make it appropriate to be applied in high-pressure measurement in hostile conditions, e.g., downhole and ocean-bottom.

High Pressure Sensor Based on Photonic Crystal Fiber for Downhole Application

Fiber Optic Pressure Sensor Based on Polarization-Maintaining Photonic Crystal Fiber for Downhole Application

Pressure sensor realized with polarization-maintaining photonic crystal fiber-based Sagnac interferometer

Sensitivity-Enhanced Pressure Sensor With Hollow-Core Photonic Crystal Fiber

A Reflective Temperature-Insensitive All-Fiber Polarization-Mode Interferometer and Pressure Sensing Application Based on Pm-Pcf

Diaphragm-Structured Fiber-Optic Pressure Sensors for Oil Downhole Applications

Temperature-Insensitive Gas Pressure Sensor Based on Photonic Crystal Fiber Interferometer

High pressure sensor based on intensity-variation using polymer optical fiber

High-Pressure and High-Temperature Characteristics of A Fabry-Perot Interferometer Based on Photonic Crystal Fiber

Large dynamic range pressure sensor based on two semicircle-holes microstructured fiber

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Low Cost Pressure Sensor System Based on Polarization-Maintaining Photonic Crystal Fiber Operating at 850 Nm with CCD Interrogator

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

Highly Sensitive Optical Fiber Pressure SensorBased on FPI and Vernier Effect via FemtosecondLaser Plane-by-Plane Writing Technology

Fourier Analysis for Hydrostatic Pressure Sensing in a Polarization-Maintaining Photonic Crystal Fiber.

A New Type of Structure of Optical Fiber Pressure Sensor Based on Polarization Modulation

Highly sensitive strain sensing using a polarization-maintaining photonic crystal fibre based Mach–Zehnder interferometer

Temperature-Compensated Interferometric High-Temperature Pressure Sensor Using a Pure Silica Microstructured Optical Fiber

Double F-P Interference Optical Fiber High Temperature Gas Pressure Sensor Based on Suspended Core Fiber

Hydrostatic pressure sensing with high birefringence photonic crystal fibers

Photonic Crystal Fibre Based High Temperature Sensor with Three-Beam Path Interference