Abstract:ZrB2–SiC–ZrC (ZSZ) composite ceramics were successfully prepared by sol-gel method combined with spark plasma sintering (SPS) technology. ZrB2–SiC–ZrC multiphase powders with a scale of about 100 nm were firstly synthesized by sol-gel method at 1500 °C. The sintering performance of the sol-gel powders was compared with compositionally similar commercial powders mixture by SPS. The relative densities of the corresponding target composite (ZSZ1) and reference composite (ZSZ2) were reached to 96.2% and 92% under 2000 °C/40 MPa, respectively. The densification curves indicated that the residual SiO2 and B2O3 oxides derived from the precursor triggered the liquid phase sintering mechanism of sol-gel powders above 750 °C. The removal of oxide impurities through carbothermal reduction, and the diffusion and attachment of the liquid phase at the grain boundary jointly promote the densification of ZSZ1. ZSZ1 presented better oxidation/ablation resistance than ZSZ2 during the oxyacetylene ablation tests for 200 s. The mass and line ablation rate of ZSZ1 were only −4.268 × 10−4 g/s and −8.32 × 10−3 mm/s, respectively, which is attributed to be the structure of ZrO2 fine particles uniform distributed in SiO2 melt.

Preparation and properties of zrb 2-sic composites by centrifugal gel casting process

Microstructure and mechanical properties of ZrB2-SiC composites fabricated by the centrifugal gel casting

Fabrication of ZrB 2 -Sic Ceramic Composites by Optimized Gel-Casting Method

Aqueous Gelcasting of ZrB2–SiC Ultra High Temperature Ceramics

Aqueous Gelcasting and Pressureless Sintering of Zirconium Diboride Ceramics

Dispersion And Gelcasting Of Zirconium Diboride Through Aqueous Route

Preparation of YAG Gel Coated ZrB2–SiC Composite Prepared by Gelcasting and Pressureless Sintering

Gelcasting of complex-shaped ZrB 2-SiC ultra high temperature ceramic components

Colloid and Rheological Property of the Concentrated SiC/Si Suspensions

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Preparation And Mechanical Properties Of Zirconium Diboride Matrix Composites Reinforced By Silicon Carbon Platelets

Study on gelcasting and properties of recrystallized silicon carbide

Preparation of Zrb2 Based Hybrid Composites Reinforced with Sic Whiskers and Sic Particles by Hot-Pressing

Microstructure and Mechanical Properties of ZrB2–SiC Composites Prepared by Gelcasting and Pressureless Sintering

Rheological Properties and Gelcasting Behavior of Ultrafine Zro2 Suspension

Centrifugal casting of Al2O3–15 wt.%ZrO2 ceramic composites

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Pressureless Sintering of Zrb2-Sic Composites Strengthening by Ultra-Fine Ceramic Powders

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

SPS densification and ablative performance of ZrB2–SiC–ZrC composites derived from the ternary powders by sol-gel