Abstract:Journal of Composite Materials, Ahead of Print. Laminates are produced by stacking prefabricated plies composed of fiber products. Within the aerospace industry, a ply thickness of 125 μm is commonly regarded as the standard. Ply thicknesses of less than 100 μm are generally considered as thin plies. Due to their ability to provide superior mechanical properties relative to conventional laminates thin-ply (TP) laminates are gaining interest in several high-tech industries. Although the research on TP laminates increased over the past few years, a comprehensive evaluation of the mechanical behavior of TP laminates accounting for the ply-thickness is an ongoing challenge due to the intricacies of ply interactions, and experimental difficulties. The mechanical response of fiber reinforced polymer laminates is governed by damage progression during loading, with the thickness of individual plies playing a crucial role in influencing the initiation and evolution of local cracks and failures. Therefore, in this study, the effective mechanical properties of carbon fiber reinforced polymer composite with varied ply thicknesses have been experimentally evaluated and the accumulation of the damage events has been monitored using acoustic emission measurements, utilizing a contactless laser vibrometer. In this experimental study, the ply thickness is increased in a systematic manner (ranging from 50 μm to 200 μm). Experimental investigation has been carried out in quasi-static tension and compression. The results show that unnotched TP laminates subjected to tensile loading demonstrate enhanced effective strength, attributed to less premature failure. Conversely, as the thickness of the lamina increases, there is a reduction in the overall strength of the laminate. However, in the case of the notched specimen lowest strength has been observed at a ply-thickness of 100 μm in this study. Under compressive loading, unnotched and notched specimen tends to show similar mechanical behavior to unnotched specimens under tensile loading. The overall strength is raised with decreasing ply thickness. The findings from this study may be valuable for incorporating ply-thickness considerations into models for predicting the mechanical performance of laminates under dynamic loading.

Mechanical behaviors of thin-ply composite laminates under short-beam shear and open-hole tensile loads : pseudo-homogeneous and isotropic behaviors

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

Study on biaxial tensile failure behavior of ultra-thin-ply carbon fiber reinforced composites

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Analysis of Pseudo-Ductility in Thin-Ply Carbon Fiber Angle-Ply Laminates

Experimental study on the mechanical behavior of laminates made by fiber steering: Influence of fiber angle and tow width

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Effect of shear stresses on fibre direction tensile failure using a new simple and reliable test method with thin plies

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

Experimental and numerical investigation on damage mechanism in asymmetric tapered laminates under tensile loading

Evaluating the mechanical behavior of carbon composites with varied ply-thicknesses using acoustic emission measurements

Failure Modes and Strength Prediction of Thin Ply CFRP Angle-Ply Laminates

Elastic and Fracture Behavior of Three-Dimensional Ply-to-Ply Angle Interlock Woven Composites: Through-Thickness, Size Effect, and Multiaxial Tests

Short Beam Shear Behavior and Failure Characterization of Hybrid 3D Braided Composites Structure with X-ray Micro-Computed Tomography

A novel method for the characterization of through-thickness shear constitutive behavior of composites

Static behavior of thick flax/epoxy composite laminates: multi-instrumentation mechanical failure analysis