Abstract:Journal of Sandwich Structures &Materials, Ahead of Print. The hybridization technique has recently been used to produce a new generation of composites called pseudo-ductile composites, which have shown higher failure strain compared to conventional composites, minimizing the risks of the occurrence of a catastrophic failure. The pseudo-ductility behavior in these composites is obtained by hybridization of fibers with high and low failure strains. In this study, a multi-scale finite element (FE) model incorporating micro and macro-scales is proposed to predict the failure behavior of pseudo-ductile composites. A micro-scale representative volume element (RVE), consisting of randomly distributed fibers, was generated using a Python code. Periodic boundary conditions (PBCs) were applied to the RVE generated with a periodic geometry. To account for fiber failure and ply fragmentation, the tensile strength of fibers was distributed based on the Weibull distribution function and a user-defined UMAT subroutine was developed. Tensile loading was then applied to the RVE to simulate the composite's mechanical behavior. For validation, an RVE was developed based on experimental data from recent research on thinply and conventional thickness composites. Numerical results were compared to experimental data, demonstrating acceptable agreement. In the final step, following a sequential multi-scale modeling approach, a macro-scale model was constructed based on the outputs of the micro-scale model subjected to tensile and shear loads. The results were compared with experimental data, revealing good agreement. The proposed model allows for the optimization of pseudo-ductile composite structures to achieve a desired set of mechanical properties without the need for conducting extensive experimental material tests.

Analysis of Pseudo-Ductility in Thin-Ply Carbon Fiber Angle-Ply Laminates

Micro Failure Analysis of Fiber Metal Laminates

A nonlinear analytical model for tensile failure prediction of pseudo-ductile composite laminates

Failure Modes and Strength Prediction of Thin Ply CFRP Angle-Ply Laminates

Assessing pseudo-ductile behavior of woven thermoplastic composites under tension and bending

Ultrasound investigation of pseudo-ductility of carbon fiber reinforced polymers at ± 45° layup

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Experimental study on the mechanical behavior of laminates made by fiber steering: Influence of fiber angle and tow width

A Method for Plotting Failure Envelopes of Unidirectional Polymer Composite Materials under Different Strain Rates

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Interlaminar Stress and Damage Mechanism of Thermoplastic Composite Laminates

Effect of multi‐angle lamination on mechanical properties and damages behavior of carbon fiber reinforced resin matrix composites

Prediction of the failure behavior of pseudo-ductile composites using a multi-scale finite element model

Numerical Elastic-Plastic Simulation of Interlaminar Stresses in a Notched Angle-Ply Thermoplastic Composite Laminate

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

Characterisation of bending mechanics in uncured laminated materials using a modified Dynamic Mechanical Analysis

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

Mechanical response and critical failure mechanism characterization of notched carbon fiber reinforced polymer laminate subjected to tensile loading