Abstract:Laminated plates are often modeled with infinite dimensions in terms of the so-called Whitney–Nuismer (WN) stress criteria, which form a theoretical basis for predicting the residual properties of open-hole structures. Based upon the WN stress criteria, this study derived a new formulation involving finite width; the effects of notch shape and size on the applicability of new formulae and the tensile properties of carbon-fiber-reinforced plastic (CFRP) laminates were investigated via experimental and theoretical analyses. The specimens were prepared by using laminates reinforced by plain woven carbon fiber fabrics and machined with or without an open circular hole or a straight notch. Standard tensile tests were performed and measured using the digital image correlation (DIC) technique, aiming to characterize the full-field surface strain. Continuum damage mechanics (CDMs)-based finite element models were developed to predict the stress concentration factors and failure processes of notched specimens. The characteristic distances in the stress criterion models were calibrated using the experimental results of un-notched and notched specimens, such that the failure of carbon fiber laminates with or without straight notches could be analytically predicted. The experimental results demonstrated well the effectiveness of the present formulations. The new formula provides an effective approach to implementing a finite-width stress criterion for evaluating the tensile properties of notched fiber-reinforced laminates. In addition, the notch size has a great effect on strength prediction while the fiber direction has a great influence on the fracture mode.

Mechanical response and critical failure mechanism characterization of notched carbon fiber reinforced polymer laminate subjected to tensile loading

Characterizing and predicting the tensile mechanical behavior and failure mechanisms of notched FMLs—Combined with DIC and numerical techniques

Strain Concentration And Failure Analysis Of Notched Composite Laminates Under Tensile Loading

Failure Analysis of Notched Composite Laminate with 3D Continuum Damage Mechanics

Stress Analysis and Damage Evolution in Individual Plies of Notched Composite Laminates Subjected to In-Plane Loads

Characterizing the Off-Axis Dependence of Failure Mechanism in Notched Fiber Metal Laminates

Failure Analysis Of Center Notched Cfrp Laminates Under Multi-Axial Loading

Effect of elliptical notches on mechanical response and progressive damage of FMLs under tensile loading

Numerical simulation on notch size and shape effects of fiber-reinforced composite laminates

A Study on the Multi-axial Fatigue Failure Behavior of Notched Composite Laminates

A New Stress-Based Formulation for Modeling Notched Fiber-Reinforced Laminates

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Simulation on Size Effect of Notched Quasi-Isotropic Composite Laminates under Tensile Loading

Damage Prediction in Notched Fiber-Reinforced Composite Laminates

Numerical Study for Damage of Carbon Fiber Reinforced Resin Matrix Laminates Related to Strain Rates

Tensile Mechanical Behavior of Notched 2D-Cf/sic Composites

Notch insensitivity in fatigue failure of chopped carbon fiber chip-reinforced composites using experimental and computational analysis

Compressive Test and Numerical Simulation of Center-Notched Composite Laminates with Different Crack Configurations

Notch Effect on Strength and Fatigue Life of Woven Composite Laminates

Angle-ply orientation-dependent failure behaviors of carbon fiber reinforced polymer laminates

In Situ Damage Propagation and Fracture in Notched Cross-Ply SiC/SiC Composites: Experiment and Numerical Modeling