Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Ultrasound investigation of pseudo-ductility of carbon fiber reinforced polymers at ± 45° layup

Assessment of the 3D Ply-by-ply Fiber Structure in Impacted CFRP by Means of Planar Ultrasound Computed Tomography (Pu-Ct)

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

Damage Analysis of Carbon Fiber-Reinforced Thermoplastic Laminates under Bending Based on Acoustic Emission and Digital Image Correlation

3D photothermal reconstruction of subsurface defects in notched multidirectional CFRP laminates due to tensile fatigue loading

Analysis of Pseudo-Ductility in Thin-Ply Carbon Fiber Angle-Ply Laminates

Effect of (0°/90°) and (+45°/–45°) plies position on the failure modes and acoustic signals in carbon fiber reinforced polymer laminates under quasi-static tensile loading

Assessing pseudo-ductile behavior of woven thermoplastic composites under tension and bending

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates

Experimental investigation on open-hole CFRP laminate under combined loading using acoustic emission and digital image correlation

Experimental characterization and numerical modelling of the translaminar fracture of woven-ply hybrid fibers reinforced thermoplastic laminates

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Study on Delamination Damage of CFRP Laminates Based on Acoustic Emission and Micro Visualization

Damage analysis of combined continuous and discontinuous thin‐ply carbon/glass hybrid composite using acoustic emission

Investigation of Bending Performance of Printed Continuous Carbon Fiber Reinforced Polylactic Acid Using Acoustic Emission

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Effect of multi‐angle lamination on mechanical properties and damages behavior of carbon fiber reinforced resin matrix composites

Deformation Mechanics of Fiber-Reinforced Plastic Specimens with a [±45] Lay-Up in Tensile and Compression Tests 2. Investigation of Flat Internal Buckling Modes

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions