Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Damage Analysis of Carbon Fiber-Reinforced Thermoplastic Laminates under Bending Based on Acoustic Emission and Digital Image Correlation

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

Investigation of Bending Performance of Printed Continuous Carbon Fiber Reinforced Polylactic Acid Using Acoustic Emission

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

A Study of the Damage of Composite Laminates under Different Types of Loadings Based on Acoustic Emission Technology

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Experimental investigation on open-hole CFRP laminate under combined loading using acoustic emission and digital image correlation

Damage Analysis of Composite CFRP Tubes Using Acoustic Emission Monitoring and Pattern Recognition Approach

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Damage Mode Identification of CFRP-Strengthened Beam Based on Acoustic Emission Technique

Compressive Damage and Heat Release of Composite Laminate with Circular Prefabricated Defect, Part II-numerical Method

Progressive Failure Analysis of Laminated CFRP Composites under Three-Point Bending Load

In-situ Damage Assessment of FML Joints under Uniaxial Tension Combining with Acoustic Emission and DIC: Geometric Influence on Damage Formation

Study on Delamination Damage of CFRP Laminates Based on Acoustic Emission and Micro Visualization

Damage analysis of combined continuous and discontinuous thin‐ply carbon/glass hybrid composite using acoustic emission

Characterization of the damage mechanism in CFRP composites under mode I based on comprehensive analysis of AE signals

A Damage Sensing Method of Carbon Fiber Reinforced Polymer Composites Via Multi-frequency Electrical Impedance Fusion