Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

A Study of the Damage of Composite Laminates under Different Types of Loadings Based on Acoustic Emission Technology

Early Fatigue Damage Accumulation of CFRP Cross-Ply Laminates Considering Size and Stress Level Effects

Fatigue Behavior of CFRP/Al Adhesive Joints - Failure Mechanisms Study Using Digital Image Correlation (DIC) Technique

Experimental investigation on open-hole CFRP laminate under combined loading using acoustic emission and digital image correlation

Experimental Research on Fatigue Behavior of Composites Using Energy Dissipation Methodology

Fatigue behavior and digital image correlation monitoring of steel plates with mixed-mode edge cracks repaired with CFRP materials

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Identification of Fatigue Damage Modes for Carbon Fiber/epoxy Composites Using Acoustic Emission Monitoring under Fully Reversed Loading

Fatigue Damage Evolution and Monitoring of Carbon Fiber Reinforced Polymer Bridge Cable by Acoustic Emission Technique

Damage Mode Identification of CFRP-Strengthened Beam Based on Acoustic Emission Technique

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Unfolding the Early Fatigue Damage Process for CFRP Cross-Ply Laminates

Damage Characterization of CFRP /steel Double-Lap Bonded Joints Based on AE and DIC

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

Fatigue Damage Monitoring for Basalt Fiber Reinforced Polymer Composites Using Acoustic Emission Technique

Fatigue Characterization Study of CFRP under Hygrothermal Environment Based on Continuum Damage Mechanics Model

Tensile Fatigue Behavior and Damage Evolution of Z-Pinned Carbon/phenolic Woven Composite Using In-Situ Monitoring Technology

Damage Analysis of Carbon Fiber-Reinforced Thermoplastic Laminates under Bending Based on Acoustic Emission and Digital Image Correlation

Fatigue Damage Characterization of Carbon Fiber Reinforced Polymer Bridge Cables: Wavelet Transform Analysis for Clustering Acoustic Emission Data