Abstract:PurposeThe purpose of this paper is to investigate the influencing rule of the standoff distance variations between the nozzle outlet and the powder deposition point on forming dimensional accuracy.Design/methodology/approachThe thin‐wall parts were built with three different standoff distances: 1 mm more than the powder focus length, equal to the powder focus length and 1 mm less than the powder focus length. Based on the experimental results, the steady standoff distance can be acquired and the difference between the building height and the ideal height of thin‐wall parts can be compensated automatically in several layers by theoretical calculation.FindingsThe experimental results show that the top surface unevenness of thin‐wall parts can be compensated automatically on the consequent successive layers when the standoff distance is less than the powder focal length from the nozzle outlet to the powder focal point, and the poorer results are obtained when the standoff distance is equal to or more than the powder focal length in the deposition of stainless steel 316L under open‐loop control.Practical implicationsThe shape of parts affects the self‐regulation effect in practical applications, so the self‐regulation effect is useful when the single contour of parts is continuous straight faces and the surface of parts is perpendicular to the build platform, and will be useless for parts with holes.Originality/valueAccording to the requirements under different process conditions in practical applications, one should first find out the relationship between the standoff distance and the building height of single‐trace cladding layer, and then use regression algorithm to obtain the stable standoff distance by simple theoretical calculation. The uniform building height, layer thickness and smooth surface can be obtained at the stable standoff distance under open‐loop control.

Flattening the Solidi cation Front by Varying the Wall Thickness of the Mould in Directional Solidi cation Technology

Flattening the Solidification Front by Varying the Wall Thickness of the Mould in Directional Solidification Technology

A method for flattening the solidification front in directional solidification technology

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Influence of scale effect on surface morphology in laser powder bed fusion technology

The Effect of Thickness on the Defects and Anisotropy of Thin-Wall Hastelloy X Fabricated Via Laser Powder-Bed Fusion

Mechanism of Filling and Feeding of Thin-Walled Structures During Gravity Casting

Sidewall shape control using direct laser fabrication technology

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Numerical investigation and optimum design of complex thin-walled structures subject to internal pressure load

Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy

Effects of the location of a cast in the furnace on flatness of the solidification front in directional solidification

Innovation for forming aluminum alloy thin shells at ultra-low temperature by the dual enhancement effect

Elimination of the Stray Grain Defects of Single Crystal Blade by Variable Wall Thickness Based on Integral Ceramic Mold

Effects of Processing Parameters on the Surface Quality of Directionally Solidified Titanium Alloy Slab with Cold Crucible

The Influence of Standoff Variations on the Forming Accuracy in Laser Direct Metal Deposition

Regionalization of microstructure and mechanical properties of Ti6Al4V transition area fabricated by WAAM-LMD hybrid additive manufacturing

Research on Machining Technology of High Speed and Ultra-Thin Wall Parts

Influence of Wall Thickness on Microstructure of the Directionally Solidified Turbine Vane with High Withdrawal Rate

Wall Thickness Uniformity in ISF of Hydraulic Support: System Design, Finite Element Analysis and Experimental Verification

Numerical Investigation on the Mechanical Properties of Vault Void Lining and Steel Plate Strengthening