Abstract:For a type IV hydrogen storage vessel, the complexity of the mechanical system is a result of the increased number of thin-layered composites and geometrical details at dome parts, which significantly prolongs the computation time for traditional numerical analysis and optimal design. In this work, a framework couples machine learning (ML) and finite element (FE) analysis is proposed for a 70 MPa type IV vessel. Providing an approach that allows the winding parameters optimization process to include the corresponded feasible dome geometry. High-fidelity FE models are established and different failure modes are included. The artificial neural network (ANN) is developed and coupled with the FE models, where the irregularity of directional material distribution on both cylindrical and dome regions is adequately considered during the optimization process. Winding parameters extended by practical production modifications such as transition areas and layer ending adjustments are introduced to the modified input layer of ANN, to ensure the integrality of the complex geometrical details. The computational cost is greatly reduced with satisfying accuracy compared to FE analysis, where the optimized lay-up scheme could be obtained with a prediction error of less than 2% on the damage state function. The associated simulation results show an obvious improvement in mechanical response under designed burst pressure. Particularly, the prototypical vessels are further produced to carry out comparative experiments , which indicate that the burst pressure of the type IV vessel has been improved from 145 MPa to 157.74 MPa. This is also consistent with the numerical prediction of burst pressure using Hashin failure criteria and progressive damage analysis.

Numerical investigation and optimum design of complex thin-walled structures subject to internal pressure load

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Analysis Methods of Structural Design and Characteristics of Numerical Algorithm for ETFE Air Inflated Film Structures

EXPERIMENTAL STUDY ON THE STRENGTH OF COMPLEX THIN-WALLED STRUCTURES UNDER INTERNAL PRESSURE

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

Investigation on the Strength of Lightweight Thin- Walled Rectangular Structures Subjected to Internal Pressure

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Structural Performance Optimization and Verification of an Improved Thin-Walled Storage Tank for a Pico-Satellite

Mechanical Analysis and Reasonable Design for Ti-Al Alloy Liner Wound with Carbon Fiber Resin Composite High Pressure Vessel

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 2: CFD Simulation and Finite Element Analysis

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Numerical Analysis and Design of Concrete-Filled Wire Arc Additively Manufactured Steel Tube under Axial Compression

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Optimization Analysis On The Structure Parameters Of A 20x10(4)M(3) Ultra-Large Tank For Crude Oil Storage

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Structural Performance of Water Tank under Static and Dynamic Pressure Loading

Optimal design of thin-layered composites for type IV vessels: Finite element analysis enhanced by ANN

Strength Analysis of Vertical Metal Tank Wall and Bottom Plates Conection Area

Optimal Design of Pressure Vessel Based on Parametric Language ANSYS