Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

COMPARISON ANALYSIS OF CHF PARAMETRIC TRENDS IN VERTICAL TUBE AND 5 x 5 BUNDLE

The Study of Critical Heat Flux in Upflow Boiling Vertical Round Tube under High Pressure

An experimental study of the CHF in a square channel with non-uniformly heated rod under low pressure and low flow conditions

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

An experimental study on critical heat flux for low flow and low pressure of water in a hexagonal 7-rod bundle channel

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

Experimental Study on Critical Heat Flux in Bilaterally Heated Narrow Annuli

Prediction of CHF in vertical heated tubes based on CFD methodology

Prediction of Critical Heat Flux in Tube Bundles With Crossflow

Experimental Design and Analysis for Film Boiling Heat Transfer in a Circular Tube

Effect of bend geometry on deterioration of critical heat flux in U-tube

Investigation on the Critical Heat Flux in Typical 5 by 5 Rod Bundle at Conditions Prototypical of PWR Based on CFD Methodology

Fluid-to-Fluid Modelling of CHF at High-Pressure Subcooled Water Conditions

Numerical investigation of azimuthal heat conduction effects on CHF phenomenon in rod bundle channel

Prediction of Critical Heat Flux in Rod Bundle Based on CFD Methodology

Critical Heat Flux of Highly Subcooled Water Flow Boiling in Circular Tubes with and Without Internal Twisted Tapes under High Mass Fluxes

Subchannel Analysis of Critical Heat Flux in Radially Non-Uniform Heated Rod Assembly at Low Flow Rate

Prediction of Critical Heat Flux in Non-Uniform Heated Rod Bundle Based on Modified CHF Empirical Correlations

Effects of Non-Uniform Circumferential Heating and Inclination on Critical Heat Flux in Smooth Round Tubes

Researches in the Flow Modeling of Critical Heat Flux in Bundle

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel