Effect of bend geometry on deterioration of critical heat flux in U-tube

Yue Pan,Yuling Zhai,Jianyong Wang,Zhouhang Li

DOI: https://doi.org/10.1016/j.ijthermalsci.2024.109155

IF: 4.779

2024-05-19

International Journal of Thermal Sciences

Abstract:The general characteristics critical heat flux (CHF) has been extensively explored in straight and continuously curved channels. However, studies in locally curved geometries like U-tube, which are also widely existed in heat exchangers, were rather limited. The present work fills this gap by numerically investigating CHF in U-tube and reports some unique phenomenon by comparing with straight tubes. Results show that a 36 % decrease in the heat transfer coefficient occurs on the inwall of U-tube, while the heat transfer coefficient on the outwall remains stable. As the heat flux further increases, heat transfer on the outwall deteriorates, while heat transfer coefficient on the inwall tends towards infinitesimal levels. CHF inside the U-bend is smaller than that of the straight tube and smaller than the outside of the bend. Larger curvature and smaller tube diameter permit higher bubble departure frequency, thus providing sufficient liquid supply and increasing CHF. A greater nucleation site density or a larger departure diameter for bubble contributes to larger boundary void fraction, which eventually aggravates the extent of heat transfer deterioration. Finally, a prediction correlation for CHF of U-tubes was presented to guide the design of heat exchanges involving return bends.

engineering, mechanical,thermodynamics