Subcooled boiling-induced vibration of a single heater rod confined with metallic walls

Kenji Takano,Yusuke Hashimoto,Tomoaki Kunugi,Takehiko Yokomine,Zensaku Kawara

2015-01-01

Abstract:Some existing studies have suggested that subcooled boiling on the surface of a heating rod in water induces a vibration of the rod itself. Considering nuclear power generation with light water reactors, latency of this phenomenon in their reactor cores or spent fuel pools should be investigated, because systems of both Boiling Water Reactors (BWR) and Pressurized Water Reactors (PWR) allow long fuel rods to heat themselves in water. After the Fukushima Daiichi accident, such investigations especially for the cases of abnormal situations or unexpected severe accidents are being important. A series of studies to accumulate fundamental understandings of this phenomenon, so-called “Subcooled Boiling-Induced Vibration (SBIV)”, has been conducted by the authors through the experiments with a simple system of a single heater rod installed in atmospheric static water. Acceleration of the SBIV of the superheated rod was measured by an accelerometer under the various subcooling conditions, and the degree of subcooling of the water was controlled by electrical power input to the heater rod. The SBIV was investigated to be varied depending on generation, growth, moving, departure and condensation of bubbles due to subcooled boiling on or near the rod surface. The present study clarified that the SBIV of the single rod showed the characteristic power spectrum of its vibration, focusing on influences by metallic walls to confine the water passage for the heater rod, from the point of view of thermal conditions and bubble behaviors near the rod.