Abstract:TC4/Ni metallic-intermetallic laminated (TN-MIL) composites were prepared by hot pressing at different temperatures and with varying Ni foils thicknesses. The phase formation and Ti2Ni microstructure evolution were analyzed in detail using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and x-ray diffraction (XRD). The mechanical properties were evaluated through nanoindentation, room-temperature compression, and tensile tests, while fracture morphology was examined by SEM. The results show that as the hot-pressing temperature increases, the Ni3Ti and TiNi phases at the interface gradually transform into the Ti2Ni phase. Once the Ni is fully dissolved in the TC4 matrix, the intermetallic compound layer disappears. This diffusion process creates a concentration gradient in TC4. As the Ni concentration increases, the Ti2Ni phase transitions from an island-like structure to a network, and ultimately forms a lamellar or mixed morphology. The TN-MIL composite prepared at 800°C has three intermetallic compound layers of Ni3Ti, TiNi and Ti2Ni, as well as lamellar, network and island-like Ti2Ni structures in the TC4 matrix. This composite demonstrates excellent mechanical performance, achieving a maximum compressive strength of 1580 MPa and an ultimate tensile strength of 1010 MPa. The Ti2Ni phase improves the material's deformation resistance due to its high strength and hardness, thereby increasing the overall hardness and strength. However, the inherent brittleness of Ti2Ni and its propensity to induce stress concentrations at grain boundaries under strain conditions significantly elevate the risk of material fracture.

Fabrication , microstructure and mechanical properties of W e NiTicomposites

Microstructure evolution and mechanical properties of TC4/Ni metallic-intermetallic laminated composites: Formation and strengthening effects of Ti2Ni phases

Investigation of microstructure and irradiation behavior of W–Nb/Ti composites prepared by spark plasma sintering

Microstructure and mechanical properties of liquid–phase sintered W@NiFe composite powders

In-situ EBSD study of the multiple deformation modes of a TiNb/Nb/NiTi multilayer composite

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Preparation and organization of W-Ni/TiC composite material

Effect of Doped Niobium on the Microstructure and Properties of W–Nb/TiC Composites Prepared by Spark Plasma Sintering

Tailoring martensitic transformation and mechanical properties of Ti–Ni composite reinforced by network structure of in-situ TiB and La2O3 phase

Effect of Ni Content on Microstructure and Properties of WC-Ni Composites Prepared by Electroless Plating and Powder Metallurgy

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

Effect of Sintering Temperatures on Grain Coarsening Behaviors and Mechanical Properties of W-NiTi Heavy Tungsten Alloys

Study of the high-temperature mechanical properties of Al-6061/NiTi reinforced metal matrix composites

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Fabrication and Property of W/Tininb Shape Memory Alloy Laminated Composite

Fabrication of Ni/WC composite with two distinct layers through centrifugal infiltration combined with a thermite reaction

Microstructure and Mechanical Properties of NiTi Alloy Prepared by Double-Wire + Arc Additive Manufacturing Plus In Situ Heat Treatment

Microstructure and High-Temperature Mechanical Properties of CrMnFeCoNi/TiAl Composites Prepared by Powder Metallurgy

Novel titanium matrix composites reinforced by NiCoCr medium entropy particles

Anomalous hot deformation behavior and microstructure evolution of as-cast martensitic NiTi alloy during hot compression