Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Dynamic Deformation Monitoring for Long-Span Bridges under Construction and EMD Denoising Method

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Wavelet De-Noising with Improved Threshold Method for Bridge Health Monitoring

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Deformation monitoring and analysis of a long-span cable-stayed bridge during strong typhoons

Displacement Monitoring of a Bridge Based on BDS Measurement by CEEMDAN-Adaptive Threshold Wavelet Method

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Data analysis and dynamic characteristic investigation of large-scale civil structures monitored by RTK-GNSS based on a hybrid filtering algorithm

Environmental effect on vision-based structural dynamic displacement monitoring

A Morphology Filter-Assisted Extreme-Point Symmetric Mode Decomposition (MF-ESMD) Denoising Method for Bridge Dynamic Deflection Based on Ground-Based Microwave Interferometry

Simultaneous de-noising and enhancement method for long-span bridge health monitoring data based on empirical mode decomposition and fractal conservation law

Bridge monitoring using BDS-RTK and GPS-RTK techniques

Automatic uncoupling of massive dynamic strains induced by vehicle- and temperature-loads for monitoring of operating bridges

Review of Bridge Structural Health Monitoring Based on GNSS: From Displacement Monitoring to Dynamic Characteristic Identification

Study For Real-Time Monitoring Of Large-Span Bridge Using Gps

Dynamic Deformation Measurement of Bridge Structure Based on GB-MIMO Radar

Design of Wireless Synchronous Structural Monitoring System for Large Bridges