Abstract:Structural health monitoring (SHM) is important in ensuring safety of large civil engineering structures. Global Navigation Satellite Systems (GNSS)-based technology has been commonly used in SHM systems due to its unique ability to obtain real-time 3D displacement information. GNSS-based SHM systems are often integrated with other sensors (e.g., accelerometers) to take advantage of the complementary natures of different technologies and to enhance the overall performance of the integrated systems (e.g., more accurate displacement information). The conventional multi-rate Kalman filter (conventional MRKF) has been frequently used to integrate data from different technologies as the data sampling rate of a GNSS system is usually much lower than that of most other sensors. It is, however, well known that GNSS observations often contain outliers that can significantly reduce the accuracy and reliability of either the GNSS-only or integrated SHM systems. We propose a new robust multi-rate Kalman filter-based approach to integrate observations from GNSS and other sensors more robustly. The approach allows for the first time to mitigate the influence of outliers in the observations of an integrated GNSS and accelerometer SHM system, especially those in the GNSS observations in a real-time mode, which is critically important for an SHM system. Extensive experiments with data from a shaking table and from Stonecutters Bridge, a large cable-stayed bridge in Hong Kong, captured during a strong typhoon have demonstrated that the proposed method can reduce the effects of outliers effectively. The shaking table test has shown that when the method was used with an integrated GNSS and accelerometer system and outliers were present in the observations, the overall accuracy of the system was increased by up to about 70% compared with a GNSS-only system and up to about 44% higher compared to the same integrated system, but the data were processed with the conventional MRKF. It should be noted that the improvements depend on the number and magnitudes of the outliers in the observations. From the frequency perspective, the new method can capture a much broader band and more accurate vibration frequency.

Data analysis and dynamic characteristic investigation of large-scale civil structures monitored by RTK-GNSS based on a hybrid filtering algorithm

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

An investigation of the dynamic characteristics of super high-rise buildings using real-time kinematic–global navigation satellite system technology

A combined algorithm for denoising GNSS-RTK positioning solutions with application to displacement monitoring of a super-high-rise building

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Analysis of Bridge Movements and Damage Based on GPS Monitoring Technique

Correction of Misalignment Errors in the Integrated GNSS and Accelerometer System for Structural Displacement Monitoring

High-rate bridge displacement monitoring with low-rate virtual reference station data

GNSS/accelerometer Robust Monitoring Model for Dynamic Displacement of Structures and Buildings

Real-time outlier detection in integrated GNSS and accelerometer structural health monitoring systems based on a robust multi-rate Kalman filter

Study For Real-Time Monitoring Of Large-Span Bridge Using Gps

Experimental Study of Accuracy of High-Rate GNSS in Context of Structural Health Monitoring

A multimodal natural frequency identification method of long-span bridges using GNSS

Vertical Deformation Monitoring of the Suspension Bridge Tower Using GNSS: A Case Study of the Forth Road Bridge in the UK

Simple Geometrical Model to Analyze the Motion Detection of Bridges Based-Gps Technique: Case Study Yonghe Bridge

Bridge monitoring using BDS-RTK and GPS-RTK techniques

New Quality Control Algorithm Based on GNSS Sensing Data for a Bridge Health Monitoring System

Monitoring of Bridge Deformation Using GPS Technique

Application of the Real-Time Kinematic Global Positioning System in Bridge Safety Monitoring