Abstract:Internal and external factors impacted the safety of large - scale civil engineering structures after their construction. Thus, this study used the real - time kinematic global navigation satellite system (RTK - GNSS) technology to monitor a super - high - rise building and a long - span bridge in China. First, the effects of positioning errors and noise in the different environments were investigated. And this study revealed that the multipath - dominated background noise generated by water is not negligible. To suppress noise, the researchers next proposed a hybrid noise reduction algorithm that combined wavelet threshold (WT) and complete empirical mode decomposition with adaptive noise (CEEMDAN) based on autocorrelation function and cross - correlation coefficient. The results proved that the method applied can weaken noise and maintain adequate information. The noise reduction is the best compared with ensemble empirical mode decomposition (EEMD), CEEMDAN, and EEMD - Chebyshev. Finally, the direction of the main motion of the super - high - rise building is calculated. And the error between the first - order frequency and finite-element analysis is 0.189%, the maximum relative error for the third - order frequency is only 4.379%. The frequencies, damping ratios, and failure probabilities of the Fumin bridge are also obtained under different traffic loads. Furthermore, the intrinsic frequency inaccuracy measured by RTK - GNSS is less than that by the accelerometer in the same monitoring period.

Application of the Real-Time Kinematic Global Positioning System in Bridge Safety Monitoring

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Study For Real-Time Monitoring Of Large-Span Bridge Using Gps

Development of Online Safety Monitoring Information Management System for Bridges in Hangzhou City

Data analysis to Real Time Displacement Monitoring of Humen Bridge by GPS(RTK)

Bridge monitoring using BDS-RTK and GPS-RTK techniques

Monitoring of Bridge Deformation Using GPS Technique

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

High-rate bridge displacement monitoring with low-rate virtual reference station data

Hong Kong–Zhuhai–Macao Bridge deformation monitoring using PPP-RTK with multipath correction method

Analysis of Bridge Movements and Damage Based on GPS Monitoring Technique

TIME–FREQUENCY ANALYSIS OF A SUSPENSION BRIDGE BASED ON GPS

Automatic recognation and real-time alarming of eerthquake induced vibration of a tied arch bridge

Review of Bridge Structural Health Monitoring Based on GNSS: From Displacement Monitoring to Dynamic Characteristic Identification

A REMOTE DEFORMATION MONITORING SYSTEM FOR A CABLE-STAYED BRIDGE USING WIRELESS INTERNET-BASED GPS TECHNOLOGY

Health monitoring and assessment management system of Wenhui Bridge

Data analysis and dynamic characteristic investigation of large-scale civil structures monitored by RTK-GNSS based on a hybrid filtering algorithm

The real-time health monitoring system of Qianjiang 4th Bridge

Experimental Research on Daily Deformation Monitoring of Bridge Using BDS/GPS

Study on The Technical Plan of Continuous Beam Rotation Construction Monitoring and Early Warning

GPS Performance Assessment of Cable-Stayed Bridge using Wavelet Transform and Monte-Carlo Techniques