Abstract:This paper presents one of the first attempts of indirect Bridge Health Monitoring (BHM) for cable damage identification in a cable-stayed bridge. The premise of the work is to identify the location and the severity of a sustained structural damage to the cables, measured solely by vibration response of a moving vehicle passing over the bridge. To this aim, new formulations of dynamic coupling between the vehicle and the bridge are developed, utilizing finite element (FE) approach and validated. Further, the proposed framework to obtain the Vehicle-Bridge Interaction (VBI) is extended to a large-scale cable-stayed bridge. Various damage cases, caused by a partial and incremental change in structural stiffness of cables, being representative of gradual sectional loss due to corrosion, are taken into account. A damage index based on the Empirical Mode Decomposition (EMD) scheme is presented, and through extensive numerical investigations, it is demonstrated that under certain vehicle parameters the vehicle vibration response not only is capable of identifying the suffered damage to the bridge, but also is able to identify the damage location, and further to assess its severity. The contributions of the work are fourfold: (1) Many of the existing studies only focus on the simplified models of the bridge based on a simply supported Euler–Bernoulli beam theory; however, this paper extends the VBI framework to a three-dimensional numerical model of a large-scale bridge structure, being rarely reported in the BHM context. (2) The validation of the technique is demonstrated through extensive numerical investigations on a statically indeterminate cable-stayed bridge. (3) Successful detection, localization and assessment of damage to the cables are obtained using realistic range of vehicle parameters without any bridge response measurements. (4) Through extensive parametric study, the significance of various parameters on the effectiveness of the proposed approach is carefully investigated and discussed.

GPS Performance Assessment of Cable-Stayed Bridge using Wavelet Transform and Monte-Carlo Techniques

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Stayed-Cable Bridge Damage Detection and Localization Based on Accelerometer Health Monitoring Measurements

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Application of a hybrid structural health monitoring approach for condition assessment of cable-stayed bridges

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Deformation monitoring and analysis of a long-span cable-stayed bridge during strong typhoons

Performance Monitoring of the Geumdang Bridge Using A Dense Network of High-Resolution Wireless Sensors

Drive-by-bridge inspection for damage identification in a cable-stayed bridge: Numerical investigations

Online Monitoring of Flexural Damage Index of a Cable-Stayed Bridge

Structural Health Monitoring (SHM) for a cable stayed bridge under typhoon

Application of the Real-Time Kinematic Global Positioning System in Bridge Safety Monitoring

Structural Monitoring of Cable-Stayed Bridge: Analysis of GPS versus Modeled Deflections

Structural Health Monitoring of a Long-span Cable-stayed Bridge

Validation of a large-scale wireless structural monitoring system on the Geumdang Bridge

A multi-way data analysis approach for structural health monitoring of a cable-stayed bridge

Structural Health Monitoring of a Cable-Stayed Bridge Using Smart Sensor Technology: Deployment and Evaluation

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Wireless Sensing and Embedded Monitoring Algorithm for Damage Diagnosis in PSC Girders

Development of Structural Health Monitoring Systems for Railroad Bridge Testbeds