Abstract:The vertical deformation monitoring of a suspension bridge tower is of paramount importance to maintain the operational safety since nearly all forces are eventually transferred as the vertical stress on the tower. This paper analyses the components affecting the vertical deformation and attempts to reveal its deformation mechanism. Firstly, we designed a strategy for high-precision GNSS data processing aiming at facilitating deformation extraction and analysis. Then, 33 months of vertical deformation time series of the southern tower of the Forth Road Bridge (FRB) in the UK were processed, and the accurate subsidence and the parameters of seasonal signals were estimated based on a classic function model that has been widely studied to analyse GNSS coordinate time series. We found that the subsidence rate is about 4.7 mm/year, with 0.1 mm uncertainty. Meanwhile, a 15-month meteorological dataset was utilised with a thermal expansion model (TEM) to explain the effects of seasonal signals on tower deformation. The amplitude of the annual signals correlated quite well that obtained by the TEM, with the consistency reaching 98.9%, demonstrating that the thermal effect contributes significantly to the annual signals. The amplitude of daily signals displays poor consistency with the ambient temperature data. However, the phase variation tendencies between the daily signals of the vertical deformation and the ambient temperature are highly consistent after February 2016. Finally, the potential contribution of the North Atlantic Drift (NAD) to the characteristics of annual and daily signals is discussed because of the special geographical location of the FRB. Meanwhile, this paper emphasizes the importance of collecting more detailed meteorological and other loading data for the investigation of the vertical deformation mechanism of the bridge towers over time with the support of GNSS.

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Identifying Modal Parameters of a Multispan Bridge Based on High-Rate GNSS–RTK Measurement Using the CEEMD–RDT Approach

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Data analysis and dynamic characteristic investigation of large-scale civil structures monitored by RTK-GNSS based on a hybrid filtering algorithm

A multimodal natural frequency identification method of long-span bridges using GNSS

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Displacement Monitoring of a Bridge Based on BDS Measurement by CEEMDAN-Adaptive Threshold Wavelet Method

Simultaneous de-noising and enhancement method for long-span bridge health monitoring data based on empirical mode decomposition and fractal conservation law

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Fusion of GNSS and Speedometer Based on VMD and Its Application in Bridge Deformation Monitoring

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Review of Bridge Structural Health Monitoring Based on GNSS: From Displacement Monitoring to Dynamic Characteristic Identification

Modal frequencies evaluation of a damaged bridge using RCVMD algorithm based on sensor dynamic responses

Noise Reduction for Improvement of Ultrasonic Monitoring Using Coda Wave Interferometry on a Real Bridge

Dynamic Deformation Measurement of Bridge Structure Based on GB-MIMO Radar

Performance monitoring and diagnosis of bridge structures based on time multiscale divide and conquer strategy

OPERATIONAL MODEL IDENTIFICATION AND CALIBRATION OF CFST ARCH BRIDGE BASED ON AMBIENT EXCITATION

Vertical Deformation Monitoring of the Suspension Bridge Tower Using GNSS: A Case Study of the Forth Road Bridge in the UK

Dynamic Receptance Analysis Combined with Hybrid FE-SEA Method to Predict Structural Noise from Long-Span Cable-Stayed Bridge in Urban Rail Transit

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges