Abstract:Moving vehicles equipped with various types of sensors can efficiently monitor the health conditions of a population of transportation infrastructure such as bridges. This paper presents a mobile crowdsensing framework to identify dense spatial-resolution bridge mode shapes using sparse drive-by measurements. The proposed method converts mode shape identification into a physical-informed optimization problem with two objective function terms. The first objective minimises the mode shape identification error based on the fact that the ratio of a specific order mode shape value at any two locations is time-invariant. Since the bridge mode shape should be globally smooth even when the local stiffness is discontinuous, the smoothness of the identified mode shape is introduced as the second objective. The feasibility and advantages of the proposed model are verified numerically and through large-scale experimental studies. Numerical results demonstrate that the proposed method can efficiently identify bridge mode shapes with a desirable accuracy. The adverse effects of road roughness and measurement noise on the mode shape identification accuracy are substantially suppressed by introducing crowdsensing and making use of collected responses over multiple trips. The applicability of the proposed method for bridges having varying cross sections and multiple spans is also studied. A series of drive-by tests with different vehicle masses and speeds are conducted on a large-scale footbridge. The experimental results verify that the proposed method can accurately identify the bridge mode shapes and is robust to vehicle mass and speed variation. The identification accuracy of large-scale bridge mode shapes using crowdsensing drive-by measurements is demonstrated in this study.

Identifying Modal Parameters of a Multispan Bridge Based on High-Rate GNSS–RTK Measurement Using the CEEMD–RDT Approach

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

A multimodal natural frequency identification method of long-span bridges using GNSS

Rapid Seismic Risk Assessment of Bridges Using UAV Aerial Photogrammetry

DEEP LEARNING-BASED AUTOMATIC BLIND IDENTIFICATION PROCEDURE FOR STRUCTURAL MODAL IDENTIFICATION

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

A Legendre Neural Network-Based Approach to Multiparameter Identification of Traffic Loads Across the Full Spatiotemporal Domain

Modal frequencies evaluation of a damaged bridge using RCVMD algorithm based on sensor dynamic responses

Extracting Relevant Patterns from GNSS Observations to Mitigate Multipath in RTK Deformation Monitoring

Bridge modal identification method based on adaptive VMD-HT algorithm

Bayesian-guided operational modal identification of a highway bridge considering non-uniform sampling

Mobile crowdsensing framework for drive-by-based dense spatial-resolution bridge mode shape identification

A Multi-Scale Anti-Multipath Algorithm for GNSS-RTK Monitoring Application

Automated modal identification using principal component and cluster analysis: Application to a long‐span cable‐stayed bridge

Bridge modal identification based on successive variational mode decomposition using a moving test vehicle

Modal parameter identification of a multiple-span post-tensioned concrete bridge using hybrid vibration testing data

Hong Kong–Zhuhai–Macao Bridge deformation monitoring using PPP-RTK with multipath correction method

Fusion of GNSS and Speedometer Based on VMD and Its Application in Bridge Deformation Monitoring

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Simultaneous identification of bridge damage and vehicle parameters based on bridge strain responses

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges