Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Hong Kong–Zhuhai–Macao Bridge deformation monitoring using PPP-RTK with multipath correction method

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Extracting Relevant Patterns from GNSS Observations to Mitigate Multipath in RTK Deformation Monitoring

High-rate bridge displacement monitoring with low-rate virtual reference station data

Bridge monitoring using BDS-RTK and GPS-RTK techniques

A New Method for Deformation Monitoring of Structures by Precise Point Positioning

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Application of the Real-Time Kinematic Global Positioning System in Bridge Safety Monitoring

Experimental Research on Daily Deformation Monitoring of Bridge Using BDS/GPS

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Multipath hemispherical map model with geographic cut-off elevation constraints for real-time GNSS monitoring in complex environments

Monitoring of Bridge Deformation Using GPS Technique

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Point Cloud Registration Methods for Long-Span Bridge Spatial Deformation Monitoring Using Terrestrial Laser Scanning

Principle and performance of multi-frequency and multi-GNSS PPP-RTK

Analysis of Bridge Movements and Damage Based on GPS Monitoring Technique

Review of Bridge Structural Health Monitoring Based on GNSS: From Displacement Monitoring to Dynamic Characteristic Identification

Application of GNSS-PPP on Dynamic Deformation Monitoring of Offshore Platforms

Dynamic Triple-difference Method for Single Frequency GPS Deformation Monitoring

Enhancing multi-GNSS positioning performances in harsh environments via a refined joint troposphere-multipath hemispherical map