Abstract:For structural health monitoring of large bridges,the traditional manual detection is inadequate because of its strong subjectivity,bad entirety and bad timeliness.The widely used wired health monitoring system also has some problems in the actual applications.For example,it is hard to wire in some area and it is easy to be affected by environment.Using wireless sensor networks in bridge structural health monitoring not only retains the advantage of wired health monitoring system but also makes up for its deficiencies in the applications.The paper describes the composition of the whole system,and discusses the composition of wireless sensor nodes in the monitoring area of the system.Through studying the composition of base station,the paper gives the role of base station in the health monitoring system.On the basis of the composition of wireless sensor nodes,the paper addresses the mean value drift of the accelerometer output resulting from temperature changes.It gives a method to calibrate the output value of using temperature compensation technology.In order to verify this method,we give a comparison between uncorrected accelerometer readings and corrected accelerometer readings.Then,through proposing the necessity of time synchronization of all nodes before data collection,the paper discusses the principle of time synchronization.At last,we built a health monitoring system which was composed by data collection,data transmission,data reception and data analysis.And we tested the system in the anchor cable of Runyang Yangtze River Bridge.We installed the wireless sensor node in the anchor cable and obtained its vibration information through accelerometer.Then these data was sent to the base station,and to monitoring center in final.By analyzing these data,the vibration frequency spectrum of anchor cables could be obtained.Through analyzing the frequency,the strength of bridge's cables would be figured out.It is useful to identify if the bridge is in a healthy status.If the data deviates from the normal range,the monitoring center will respond in time.At last,the paper gives a conclusion that the wireless system is suitable for bridge structural health monitoring field and useful for actual application.

Design of Wireless Synchronous Structural Monitoring System for Large Bridges

Development of Online Safety Monitoring Information Management System for Bridges in Hangzhou City

Design And Testing Of A Wireless Strain Sensor Toward Large-Span Spatial Structures

Large-Scale Bridge Structural Health Monitoring System Based on Smart Sensor Networks

Multi-channel fiber optical sensing system for urban bridge cluster health monitoring

Design of the wireless system for health monitoring of a large span gymnasium structure

Study on Health Monitoring System Design of Cable-Stayed Bridge

Design of a wireless measurement system based on WSNs for large bridges

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

A new method for bridge structural health monitoring based on wireless sensor networks

Health monitoring and assessment management system of Wenhui Bridge

Design of A Wireless Multi-Radio-Frequency Channels Inspection System for Bridges

Validation of a large-scale wireless structural monitoring system on the Geumdang Bridge

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Development and Application of Temperature Measurement System for Urban Bridges

An Introduction to the Heterogeneous SHM System for a Super-large-scale Multiple-tower Suspension Bridge

Healthy monitoring and altering system on-line of bridge structures Ⅰ——Design for monitoring assessment,altering system and modules

Wireless Sensor Networks for Bridge Structural Health Monitoring

Study For Real-Time Monitoring Of Large-Span Bridge Using Gps

A Study on Building Wireless Acceleration Sensor Network for Global Monitoring on Cable-Stayed Bridge of Songhua River

Structural Health Monitoring Design and Performance Evaluation of a Middle-Span Bridge