Abstract:Micro electrical discharge machining (EDM), enhanced with ultrasonic vibration, is explored and assessed as a method for developing microelectrode array, for microelectrode array fabricated by LIGA has shortcomings such as complex technology and high price. Based on the mechanism of micro-EDM, micro-hole array discharges to fabricate microelectrode array by reverse copying. In the process of reverse copying, the thicker rod electrode can not rotate, resulting in electric arc and short-circuit occurring easily, so it is necessary to add ultrasonic vibration on the plane plate electrode, in order to exclude debris as soon as possible and stabilize machining process. In the process of machining, four parameters, such as working voltage, working capacity, ultrasonic amplitude and holes spacing, are important to machining efficiency, each parameter has four typical values. In order to reduce experiment times, a scheme of orthogonal experiment was designed with different parameters combination. With result of experiments, the ratio of mean square deviation to error mean square deviation of each parameter was calculated and significance of each parameter was obtained, and the best parameters combination was asserted through theoretical calculation. Also, experimental study of using microelectrode array to machine micro-hole array by Micro- EDM was made and influence curve of each parameter was drawn. Finally, 5×5 arrays of microelectrode were obtained, the diameter of single electrode is less than about 30.m and heightto- width aspect ratios is more than 8, moreover, these microelectrode arrays have good coaxiality and surface quality.

Research On Micro Ecm Using Micro Array Electrode

Research On Micro Electrode Fabrication Based On Ecm

Research On Micro Square Array Electrodes And Holes Combination Process by EDM and ECM

Micro Electrochemical Machining And Its Influencing Factors

Study On Micro Electrochemical Machining At Micro To Meso-Scale

Micro Electrochemical Machining of Array Micro-Grooves Using In-Situ Disk Electrode Fabricated by Micro-WEDM

Research on Side-Insulation of Tool Electrode for Micro Electrochemical Machining

Pulsed Micro-Electrochemical Machining Technology

Research on Micro Electrochemical Machining Based on Multifunction Machine Tool

Electrochemical Micromachining Based on Multifunction Machine Tool

Research on Electrochemical Micromachining System and Related Techniques

Method of Microelectrode with Electrochemical Machining and Its Applications

Electrostatic Actuating Bendable Flat Electrode for Micro Electrochemical Machining

Analysis and Experimental Study of Micro ECM with Intermittent Retraction of Electrode

Research on Improvement of Accuracy of Micro ECM with Multitechnique Integration

Experimental Study of Microelectrode Array and Micro-Hole Array Fabricated by Ultrasonic Enhanced Micro-EDM

Feasibility Study of Laser and In-Situ ECM of Array Holes

Electrochemical Machining Method Of Microelectrode And Comparisons With Microelectrode Made By Electrical Discharge Machining

Experimental Research Of Orbital Machining Micro Array Shaft And Hole On Electro-Discharge Machine

Research on Micro Electrochemical Milling

Micro-milling/micro-EDM Combined Processing Technology for Complex Microarray Cavity Fabrication