Abstract:Owing to their unique microstructure, GH3230 superalloys prepared using laser powder bed fusion (LPBF) exhibit high strength but low ductility, which limits their functional performance in engine combustion chambers. In this study, the process parameters were optimized to obtain LPBF GH3230 with minimal defects, and solid-solution treatment (ST) was conducted to modulate its inhomogeneous microstructure and mechanical properties. The results revealed that ST eliminated the substructure of as-printed (AP) samples and transformed nano-M 23 C 6 into micron and submicron M 6 C/M 12 C in situ. Significant amounts of M 6 C/M 12 C promoted Orowan strengthening, but the quasi-continuous semi-coherent lattice interface between M 6 C/M 12 C and the matrix was a weak zone for cracking, resulting in reduced plasticity owing to the presence of micron carbide. The increased solid solution temperature causes the carbide to remelt, triggering a strong plastic transformation. The impact of carbide size on strength and plasticity conversion rate was more significant than that of carbide content. Final, LPBF-GH3230 samples containing micron carbides were obtained in ST below 1230 °C with an ultimate tensile strength (UTS) comparable to that of forgings. Further increase in the ST temperature to 1280 °C eliminated the carbides, a LPBF-GH3230 that fulfilled the strength standard for cast parts (647 ± 23 MPa) with an excellent elongation (39.4 ± 1.7%) was obtained. This study provides a theoretical basis for the practical application of the LPBF GH3230 superalloy in the aerospace industry and offers guidance for improving post-treatment methods to ensure high plasticity.

Oxidation Behavior and Control of Rene 104 Superalloy Produced by Laser Solid Forming

Oxidation Behavior and Control Method in Laser Solid Forming of Rene 104 Superalloy

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Improvement in mechanical properties of Rene 104 superalloy during laser additive manufacturing process

Oxidation kinetic behavior and microstructure mechanism of GH3536 alloy fabricated by laser powder bed fusion

Characterization of the Recasting-Affected Zone in the Nickel-Based Superalloy Upon Single-Pulse Laser Treatment

New Design Concept for Stable Α-Silicon Nitride Based on the Initial Oxidation Evolution at the Atomic and Molecular Levels

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Alloy Design for Additive Manufacturing: Early-Stage Oxidation of Nickel-Based Superalloys

Oxidation behavior of Hastelloy X alloy fabricated by selective laser melting and subsequent hot isostatic pressing treatment

Ultra-high temperature oxidation resistant refractory high entropy alloys fabricated by laser melting deposition: Al concentration regulation and oxidation mechanism

The role of annealing heat treatment in high-temperature oxidation resistance of laser powder bed fused Ti6Al4V alloy subjected to massive laser shock peening treatment

Improvement in Oxidation Resistance of Ti2AlNb Alloys at High Temperatures by Laser Shock Peening

Solidification Track Morphology, Residual Stress Behavior, and Microstructure Evolution Mechanism of FGH96-R Nickel-Based Superalloys during Laser Powder Bed Fusion Process

Microstructure evolution and columnar to equiaxed transition of oxide dispersion strengthened nickel-based superalloy fabricated by laser metal deposition: From single/multi-track process optimization to bulk sample

Strength-plasticity transition mechanism after the solution treatment of GH3230 superalloy fabricated via laser powder bed fusion

Corrosion behavior of laser powder bed fusion additive manufacturing produced TiNi alloy by micro-arc oxidation

In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects