Abstract:In the quest to enhance the performance of conventional high-temperature alloys, the limitations of existing materials have become apparent. Refractory high entropy alloys (RHEAs) have emerged as promising candidates, exhibiting exceptional high-temperature properties and offering a novel perspective on advanced materials for extreme environments. This study systematically determined optimal process parameters via single-channel laser cladding (LC), resulting in the development of multi-channel TaNbZrTi RHEA coatings. The investigation encompassed an in-depth analysis of microstructure and oxidation behavior across a temperature range spanning from 800 to 1200 °C. The findings elucidated the complex composition of the coating, characterized by the interplay of BCC1, BCC2, and Fe 2 Nb phases. The theoretical yield strength of the coating was calculated at 1816.1 MPa, with contributions from solution strengthening, precipitation strengthening, fine crystal strengthening, and alloy foundation strength, standing at 41.1%, 41.5%, 5.5%, and 11.9%, respectively. At 800, 1000 and 1200 °C, the oxide thickness of the coating is 1.4, 2.9, and 34.5 μm, respectively. The transition of BCC2 phase at elevated temperatures and the diffusion of Fe from the substrate emerged as pivotal factors contributing to catastrophic oxidation observed at 1200 °C. Importantly, the diffusion of substrate elements facilitated the formation of Fe 2 Nb phase, which exhibited robust precipitation strengthening effects, further enhancing the coating overall strength. However, the protective role of Fe oxides proved inadequate, leading to the vulnerability of the oxidation layer and its propensity to fracture, thereby compromising the high-temperature oxidation resistance of the coating.

Ultra-high temperature oxidation resistant refractory high entropy alloys fabricated by laser melting deposition: Al concentration regulation and oxidation mechanism

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy

Strengthening mechanisms and high-temperature oxidation properties of laser-clad TaNbZrTi refractory high entropy alloy coatings

Uniting superior mechanical properties with oxidation resistance in a refractory high-entropy alloy via Cr and Al alloying

High temperature oxidation enhanced by laser remelted of CoCrFeNiAlx (x = 0.1, 0.5 and 1) high-entropy alloys

Dual Coating Layers to Enhance Oxidation Resistance for Refractory High-Entropy Alloys

Oxidation resistance of Al-containing refractory high-entropy alloys

High-temperature oxidation behavior of laser-cladded refractory Al0.75NbNi0.1Mo0.1Cr0.5Si0.1Wx high-entropy coatings

Evolution in Wear and High-Temperature Oxidation Resistance of Laser-Clad AlxMoNbTa Refractory High-Entropy Alloys Coatings with Al Addition Content

Effect of Al content on the microstructure, properties, and oxidation behaviors at 900 °C of (MoNbCoCrAlxSi0.2)70Ti30 refractory high-entropy alloys coatings fabricated by electron beam cladding

High-temperature oxidation behavior of laser additively manufactured AlCrCoNiSi-based high-entropy alloys at 1100 °C

An oxidation resistant refractory high entropy alloy protected by CrTaO4-based oxide

Laser additively manufacturing of Al0.5CoCrFeNiTi0.5 high-entropy alloys with increased resistances to corrosion 3.5% NaCl and oxidation at 1000 °C

Achieving exceptional high-temperature strength and oxidation resistance in an additively manufactured refractory high-entropy alloy via strategic elemental substitutions

Elemental effects on the oxidation of refractory compositionally complex alloys

Oxidation Behavior between 700 and 1300 °C of Refractory TiZrNbHfTa High-Entropy Alloys Containing Aluminum

Laser Metal Deposition of an AlCoCrFeNiTi0.5 High-Entropy Alloy Coating on a Ti6Al4V Substrate: Microstructure and Oxidation Behavior

Oxidation behaviour of Ti-V-Cr-Nb-Ta and Al-Ti-V-Cr-Ta refractory high entropy Alloys: Effects of Nb and Al Substitutions

Oxidation behaviour of a novel refractory high entropy alloy at elevated temperatures

Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100 °C