Abstract:In this study, a novel high entropy alloy AlCu 0.25 CoCrFeNi 2.1 is additively manufactured by laser direct energy deposition process. The microstructure, mechanical properties and corrosion resistance of the prepared AlCu 0.25 CoCrFeNi 2.1 high entropy alloy are investigated and tailored by annealing heat treatment. The results indicate the alloy exhibits a dual-phase microstructure with face-centered cubic (FCC) columnar dendrites and body-centered cubic (BCC) interdendritic structures. The annealing heat treatment facilitates the precipitation and coarsening of Cu-rich short rod-like B2 phase within the incipient FCC phase and the dissolution of incipient BCC phase, synergistically varying the proportion of FCC/BCC + B2 contents and tailoring the properties. The hardness of microstructure fluctuates under the coupling effect of precipitation strengthening and lattice distortion reduction and shows an overall downward trend with the increase of annealing time. The tensile properties are noteworthily improved within 6-h annealing and achieve a maximum ultimate tensile strength of 1156.4 MPa. After 8-h annealing, the ductility of the alloy obtains a maximum value of 30.3% with minor loss of ultimate tensile strength. The corrosion resistance is dramatically enhanced and obtains the best value after 2-h annealing, and then gradually deteriorates with the destroying of FCC matrix passive film phase by coarsened B2 phases. These results are of great importance in rapidly designing/manufacturing novel high entropy alloys by laser direct energy deposition process and tailoring microstructure, mechanical properties and corrosion resistance by annealing heat treatment.

Laser additively manufacturing of Al0.5CoCrFeNiTi0.5 high-entropy alloys with increased resistances to corrosion 3.5% NaCl and oxidation at 1000 °C

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy

CoCrFeNiMo0.2 High Entropy Alloy by Laser Melting Deposition: Prospective Material for Low Temperature and Corrosion Resistant Applications

Laser Metal Deposition of an AlCoCrFeNiTi0.5 High-Entropy Alloy Coating on a Ti6Al4V Substrate: Microstructure and Oxidation Behavior

Laser additive manufacturing of CrMnFeCoNi high entropy alloy: Microstructural evolution, high-temperature oxidation behavior and mechanism

Influences of Laser Surface Melting on Microstructure, Mechanical Properties and Corrosion Resistance of Dual-Phase Cr–Fe–Co–Ni–Al High Entropy Alloys

A Co-free Cr-Fe-Ni-Al-Si high entropy alloy with outstanding corrosion resistance and high hardness fabricated by laser surface melting

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Enhanced Surface Properties of the Al0.65CoCrFeNi High-Entropy Alloy via Laser Remelting

Microstructure, mechanical properties and corrosion resistance of direct energy deposited AlCu 0.25 CoCrFeNi 2.1 high entropy alloy: Tailored by annealing heat treatment

Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding

Significant transitions of microstructure and mechanical properties in laser additive manufacturing AlCoCrFeNi 2.1 eutectic high-entropy alloy under heat treatment

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Effects of Laser Powers on Microstructures and Mechanical Properties of Al0.5FeCoCrNi High-Entropy Alloys Fabricated by Laser Melting Deposition

High-temperature oxidation behavior of laser additively manufactured AlCrCoNiSi-based high-entropy alloys at 1100 °C

Corrosion behavior of Al0.4CoCu0.6NiSi0.2Ti0.25 high-entropy alloy coating via 3D printing laser cladding in a sulphur environment

New lightweight high-entropy alloy coatings: Design concept, experimental characterization, and high-temperature oxidation behaviors

High temperature oxidation enhanced by laser remelted of CoCrFeNiAlx (x = 0.1, 0.5 and 1) high-entropy alloys