Abstract:The Laser Powder Bed Fusion (LPBF) process offers the capacity to produce parts with complicated geometries that cannot be manufactured using traditional manufacturing processes. The aerospace industry is particularly interested in this capability because it may enable the creation of high-temperature structural parts with sophisticated cooling channel layouts. This would allow future gas turbines to operate at higher temperatures, resulting in higher efficiency. However, if they are to realize this promise, they must first enhance their knowledge of the influence of the LPBF process on alloy microstructures and its subsequent effect on mechanical properties. Furthermore, this study offers information on how to comprehend microstructural development and the impact it has on the mechanical characteristics of the CM247LC alloy processed by LPBF. Using the Direct Metal Laser Sintering technique based on Laser Power Bed Fusion, the CM247LC nickel-based superalloy was manufactured. When the CM247LC alloy was examined microscopically, carbides and cracks (both straight and serrated) were found. Electron Backscatter Diffraction studies revealed elongated grains in the longitudinal section and equiaxed clusters in the transverse section. Longitudinal sections have been determined to be predominantly composed of columnar grains with cells that have an average size of 0.7 μm. The γ/γ′ eutectic, as well as highly concentrated precipitates and highly concentrated dislocations, separate these cells from neighboring cells and grains. Up to 10 nm of the γ′ can be found inside the cells, despite having a diameter of up to 40 nm at the cell walls. The calculated rate of cooling during solidification is around 10 6 K/s based on the observed cell diameters. Tensile tests on samples that had just been manufactured reveal that yield strength is comparable to previous studies. High precipitate concentrations, dislocations density, fine cell structure, and γ' inside cells are interpreted as the sources of high strength in as-fabricated conditions.

Microstructure evolution and columnar to equiaxed transition of oxide dispersion strengthened nickel-based superalloy fabricated by laser metal deposition: From single/multi-track process optimization to bulk sample

Optimizing the Thermomechanical Process of Nickel-Based ODS Superalloys by an Efficient Method

Effect of treatment mode on microstructure evolution and mechanical properties of nickel-based superalloy fabricated by selective laser melting

Research on process optimization and microstructure of CrCoNi medium-entropy alloy formed by laser metal deposition

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

Intermediate temperature creep and deformation behavior of a nickel-based superalloy prepared by electron beam layer solidification

Microstructure evolution and formation mechanism of a crack-free nickel-based superalloy fabricated by laser engineered net shaping

Solidification Track Morphology, Residual Stress Behavior, and Microstructure Evolution Mechanism of FGH96-R Nickel-Based Superalloys during Laser Powder Bed Fusion Process

Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion

Multimaterial Additive Manufacturing of Graded Laves Phase Reinforced NiAlTa Structures by Means of Laser Metal Deposition

Research status on the effect of energy density on the forming microstructure and properties of nickel-based superalloys for laser additive manufacturing

Spreading Behavior and Hot Cracking Mechanism of Single Tracks in High Strength Al–Cu–Mg–Mn Alloy Fabricated by Laser Powder Bed Fusion

Microstructure and mechanical properties of laser-assisted epitaxial growth of nickel-based single crystal superalloys

Structural Characterization and Strength Assessment of Laser Powder Bed Fusion Manufactured CM247LC Nickel Based Super Alloy

An integrated multiscale simulation guiding the processing optimisation for additively manufactured nickel-based superalloys

Microstructural Characteristics and Mechanical Properties of an Additively Manufactured Nickel-Based Superalloy

A Synchrotron Study of Microstructure Gradient in Laser Additively Formed Epitaxial Ni-based Superalloy

Probing the temperature field and residual stress transformation in multi-track, multi-layered system

Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms

Additively manufactured oxide dispersion strengthened nickel-based superalloy with superior high temperature properties

Microstructure optimization for improving creep resistance of additively manufactured Ni-based superalloy IN939 through heat treatment