Abstract:The complex process and thermal behavior of laser additive manufacturing will lead to complex microstructure and property evolution. In order to enhance the processing efficiency of a high-strength Al-4.2Mg-0.4Sc-0.2Zr alloy fabricated by laser powder bed fusion (LPBF) additive manufacturing, a temperature gradient induced ductile-brittle transition behavior caused by changes in laser scanning speed for LPBF processed Al-4.2Mg-0.4Sc-0.2Zr alloy was reported in this study. As the laser scan speed increased from 0.4 ms -1 to 2.4 ms -1 , a transition in fracture mode from toughness to brittleness was observed, where the tensile strength was decreased from 547.6 MPa to 472.3 MPa while the elongation decreased from 13.8% to 1.9%. Based on transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD) characterizations, it was attributed to the cross-scale different microstructures from mesoscopic to microscopic as laser scan speed increased, including (i) more porosity in microscale (~30 μm), (ii) slenderer coarse grains and narrow equiaxed grain regions within melt pools in sub-microscale (~1 μm) and (iii) suppression of the Mg segregation along grain boundaries and formation of higher dislocation densities and stacking faults in the nanoscale (~200 nm). These changes in the microstructure caused the specimens processed with high scan speeds (above 1.6 ms -1 ) to be more prone to initiation of cracks during tensile, the ability of synergistic deformation between grains to decrease, and the bonding strength between grains to reduce. By simulating the thermal field of the melt pool, the formation mechanism of the different microstructures was ascribed to the different temperature gradients, which further determined the grain structures and element distributions. This work demonstrated that the structure and properties of LPBF processed high-performance Al alloys can be well tailored by processing parameter control.

Multimaterial Additive Manufacturing of Graded Laves Phase Reinforced NiAlTa Structures by Means of Laser Metal Deposition

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

A functionally graded material design from stainless steel to Ni-based superalloy by laser metal deposition coupled with thermodynamic prediction

Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing

Microstructure of NiAl-Ta-Cr in situ alloyed by induction-assisted laser-based directed energy deposition

Microstructure characteristics of a γ single-phase Ti-55Al-7.5Nb alloy fabricated via additive manufacturing

Structural transformation behavior in a high Nb–TiAl alloy additively manufactured by laser powder bed fusion

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

Microstructure evolution and columnar to equiaxed transition of oxide dispersion strengthened nickel-based superalloy fabricated by laser metal deposition: From single/multi-track process optimization to bulk sample

Microstructure and mechanical properties of Ti60–Ti 2 AlNb functionally graded materials fabricated by laser directed energy deposition

Evaluation of Microstructure and Hardness of Novel Al-Fe-Ni Alloys with High Thermal Stability for Laser Additive Manufacturing

Laser-Based Additive Manufacturing and Characterization of an Open-Porous Ni-Based Metallic Glass Lattice Structure (Ni60Nb20Ta20)

Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting

Fabrication of Ti3Al-Based Intermetallic Alloy by Laser Powder Bed Fusion Using a Powder Mixture

Laser metal deposition for additive manufacturing of AA5024 and nanoparticulate TiC modified AA5024 alloy composites prepared with balling milling process

New Ni-based superalloys designed for laser additive manufacturing

Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness

Temperature gradient induced tough-brittle transition behavior of a high-strength Al-4.2Mg-0.4Sc-0.2Zr alloy fabricated by laser powder bed fusion additive manufacturing

Ti6Al4V functionally graded material via high power and high speed laser surface modification