Abstract:The daily and annual temperature differences in mid and high latitudes areas vary greatly, which leads to thermal fatigue deterioration of concrete. The deterioration of concrete properties can also be generated by the cyclic change of humidity in concrete. In the experiment, the thermal fatigue tests of concrete with two strength grades were carried out at the temperature difference of 20 °C, 30 °C, and 40 °C (the initial temperature is 20 °C) under the condition of constant ambient humidity. The macroscopic properties change of concrete such as compressive strength and splitting tensile strength were measured. The microstructure changes of concrete were determined by ultrasonic nondestructive testing technique and mercury intrusion test. The results indicated that thermal fatigue has obvious deterioration effect on concrete. With the increase of temperature difference and cycle number, the strength of concrete decreased dramatically and the decrease of C40 concrete was greater than that of C25 concrete. The splitting tensile strength was more sensitive to thermal fatigue than compressive strength. The ultrasonic wave velocity gradually decreased and the damage factor increased, indicating the internal crack defects of concrete increased. At the same temperature difference, the porosity, total pore volume, average pore diameter, medium pore diameter, and the most probable pore diameter of concrete increased gradually with the increase of the cycle number, while the total pore surface area decreased. The pore structure showed the characteristics of coarsening and the trend of deterioration. The porosity of C40 concrete was less than that of C25 concrete, but the relative change value of porosity was larger, which reveals the internal reason for the strength damage of concrete under thermal fatigue at the microscopic level.

Effect of built-in temperature difference on curling and stresses in cement concrete slabs

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Research of Zero Stress Temperature Gradient in Cement Concrete Pavement

Deflection and Stress Analysis of Concrete Slab under Temperature and Axle Load Coupling

Effect of Thermal Parameters on Hydration Heat Temperature and Thermal Stress of Mass Concrete

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Stress analysis of concrete slab in high CFRD and measures for improving the stress state

Nonlinear strain distribution in a field-instrumented concrete pavement slab in response to environmental effects

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

Effects of Construction Conditions on Built-In Temperature Gradient of Concrete Pavement: A Numerical Study

Analysis on early-age inner stress in concrete structure

Modelling of creep effect on moisture warping and stress developments in concrete pavement slabs

Influences of Shrinkage,Creep,and Temperature on the Load Distributions in Reinforced Concrete Buildings During Construction

Measurement and Simulation of Temperature Distribution in Cement Concrete Pavement Slab during Hardening Process

Numerical Evaluation of Moisture Warping and Stress in Concrete Pavement Slabs with Different Water-To-Cement Ratio and Thickness

INFLUENCE OF AIR CONTENT ON TEMPERATURE STRESSES OF CONCRETE UNDER TEMPERATURE FLUCTUATION

The Analysis of Dowel and Tie Bars Effects on Curling Up in Concrete Pavement Slabs

Effect of thermal fatigue on mechanical properties and microstructure of concrete in constant ambient humidity

Analysis and engineering practice of temperature stress on super-long concrete structures

Temperature Stress Analysis of an Overlength Basement Concrete Structure

Insight into Thermal Stress Distribution and Required Reinforcement Reducing Early-Age Cracking in Mass Foundation Slabs