Abstract:The curing temperature is known to influence the rate of mechanical properties development of early age concrete. In realistic sites the temperature of concrete is not isothermal 20 0C, so the paper measured adiabatic temperature increases of four different concretes to understand heat emission during hydration at early age. The temperature-matching curing schedule in accordance with adiabatic temperature increase is adopted to simulate the situation in real massive concrete. The specimens under temperature-matching curing are subjected to realistic temperature for first few days as well as adiabatic condition. The mechanical properties including compressive strength, splitting strength and modulus of elasticity of concretes cured under both temperature-matching curing and isothermal 20 0C curing are investigated. The results denote that comparing temperature-matching curing with isothermal 20 0C curing, the early age concretes mechanical properties are obviously improved, but the later mechanical properties of concretes with pure Portland and containing silica fume are decreased a little and still increased for concretes containing fly ash and slag. On this basement using an equivalent age approach evaluates mechanical properties of early age concrete in real structures, the model parameters are defined by the compressive strength test, and can predict the compressive strength, splitting strength and elasticity modulus through measuring or calculating by finite element method the concreted temperature at early age, and the method is valid, which is applied in a concrete wall for evaluation of crack risking.

Analysis on early-age inner stress in concrete structure

Analysis of early-age thermal stress in concrete structure

Analyzing of Cracking Risk of Early-age Concrete Structure

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

ANALYSIS OF THERMAL STRESS IN EARLY AGE CONCRETE BASED ON AGING DEGREE METHOD

Early Age Properties and Cracking Control of Concrete

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Application of Equivalent Age Method to Concrete Thermal Cracking Control at Early Ages

EXPERIMENTAL AND NUMERICAL ANALYSIS OF EARLY-AGE STRESS IN CONCRETE DIAPHRAGM WALL OF UNDERGROUND STRUCTURES

Evaluation of Early Age Mechanical Properties of Concrete in Real Structure

YOUNG CONCRETE THERMAL CRACKING CONTROL BASED ON EQUIVALENT AGE METHOD

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

Early-age stress analysis of a concrete diaphragm wall through tensile creep modeling

Numerical Analysis of Softening Relationship for Early-Age Concrete

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Stress Prediction in Very Early-Age Concrete Subject to Restraint under Varying Temperature Histories

EXPERIMENTAL AND THEORETICAL RESEARCH ON TENSILE CREEP OF EARLY-AGE CONCRETE

CALCULATION OF MOISTURE INDUCED STRESSES AND EVALUATION OF CRACKING RISK IN EARLY-AGE CONCRETE

Relationship Between Characteristic Tensile Strain and Curing Age of Concrete

Estimation of Thermal Stresses in the Field Test under the Restraint Method