Abstract:In the present paper, the effects of thermal insulation cover curing on the rise in temperature of concrete, and further on the mechanical properties of the concrete are measured experimentally. In the experiments, polyurethane foam boards of 100 mm thickness were used for thermal insulation, and three concrete strength grades of C30, C50 and C80, were used as concrete samples. Conventional standard curing, and two heat curing methods with a constant temperature of 40 °C and 60 °C were used for comparison. The pore structure of the cement paste subject to the different curing procedures, including insulation cover curing, heat curing and standard curing, was experimentally measured using mercury intrusion porosimetry. The test results show that rate of increase in compressive strength compared with standard curing is 22–34%, 16–26%, and 23–67%, respectively, for C30, C50, C80 concrete after being subject to 1 to 3 days thermal insulation cover curing in the initial period after concrete casting. As expected, initial heat curing of concrete will result in a reduction in the long-term strength of the concrete. At 28 days, the strength reduction rate compared with standard curing due to the insulation cover curing is 3.1–5.9%, 0.6–3.0%, 0–3.2%, respectively, for C30, C50, C80 concrete. By contrast, the compressive strength reduction compared with standard curing at 28 days is 8.6–10.5%, 8.6–9.1%, 4.7–5.6%, respectively, for C30, C50, C80 concrete after being subject to a constant heat curing of 40 °C and 60 °C in the initial period after concrete casting. Measurement of the pore structure of the paste subject to different curing procedures initially after casting shows that rising curing temperature leads to coarser pores, especially an increase in capillary pore fraction. Among the four curing methods used in the present study, the effect of insulation cover curing and low temperature (40 °C) heat curing on the capillary pore content is small, while the effect of high temperature (60 °C) heat curing is significant.

Evaluation of Early Age Mechanical Properties of Concrete in Real Structure

Early Age Properties and Cracking Control of Concrete

Early-Age Index Choosing for Long-Term Quality Evaluation of Concrete Structures

Experimental Study of Mechanical Properties of Normal-Strength Concrete Exposed to High Temperatures at an Early Age

Experimental Study on Mechanical Properties of Early-Aged Concrete after Exposure to High Temperatures

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Analysis of early-age thermal stress in concrete structure

Analysis on early-age inner stress in concrete structure

Determination of the apparent activation of concrete by adiabatic test and simulation of self-heated curing process at early age

Performance of concrete containing fly ash at early ages

Analyzing of Cracking Risk of Early-age Concrete Structure

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Effect of the Thermal Insulation Cover Curing on Temperature Rise and Early-Age Strength of Concrete

Application of Equivalent Age Method to Concrete Thermal Cracking Control at Early Ages

Early-Age Mechanical Characteristics and Microstructure of Concrete Containing Mineral Admixtures under the Environment of Low Humidity and Large Temperature Variation

Experimental Research on Mechanical Properties of High Performance Concrete at Early Age

Mechanics Properties of Concrete at Low Temperature

Prediction For Temperature Evolution And Compressive Strength Of Non Mass Concrete With Thermal Insulation Curing In Cold Weather

Effect of Thermal Environment at Early Age on Hydration Phases Composition and Strength Development of Concrete Containing Fly Ash

Experimental study of macroscopic and microscopic properties of long-age hydraulic concrete based on high-temperature accelerated curing

Influence of Early-Age Moist Curing Time on the Late-Age Properties of Concretes with Different Binders