Abstract:Concrete and cement have been widely used in past decades as a result of urbanization. More and more supplementary cementitious materials are adopted in concrete because its production complements environmental conservation. The influence of slag, fly ash, limestone, etc., on compressive strength of concrete is of interest to engineers worldwide. Many previous studies were specific to certain engineering or certain experiments that could not reveal the nature of the influence of the three supplementary cementitious materials on concrete’s compressive strength. The research concerning the influence of two or more kinds of supplementary cementitious materials on concrete’s compressive strength is still unclear. Moreover, there is a lack of clarity on the optimum proportion of one or more certain cementitious materials in practical engineering or experiments. To overcome these problems, this study adopts the concrete compressive strength development over time (CCSDOT) model, which generates an explicit formula to conduct quantitative research based on extensive data. The CCSDOT model performs well in fitting the compressive strength development of concrete containing cement, slag, fly ash, and limestone flour. The results reveal the nature of the influence of the three supplementary cementitious materials on concrete’s compressive strength through the parameter analysis in the model. Two application cases are analyzed concerning the selection of the three supplementary cementitious materials and design of concrete mix proportion for practical engineering. It is concluded that the CCSDOT model and the method in this study can possibly provide guidance on both the selection of supplementary cementitious materials and the design of optimal concrete mix proportion for practical engineering. Therefore, the study is highly essential and useful.

Computational Model of Fly Ash Concrete Compressive Strength Based on the Equivalent Age

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

YOUNG CONCRETE THERMAL CRACKING CONTROL BASED ON EQUIVALENT AGE METHOD

Influence of Fly Ash on the Compressive Strength of Concrete under Temperature Match Curing Conditions

Evaluation of Early Age Mechanical Properties of Concrete in Real Structure

Application of Equivalent Age Method to Concrete Thermal Cracking Control at Early Ages

Performance of concrete containing fly ash at early ages

Experimental Investigation and Analytical Modeling of Chloride Diffusivity of Fly Ash Concrete.

Influence of Mineral Admixture on Early-Age Concrete Cracking

Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio

Early Age Properties and Cracking Control of Concrete

Compressive Strength Development of High-Volume Fly Ash Ultra-High-Performance Concrete under Heat Curing Condition with Time

Experimental study on fracture properties of self-compacting concrete

Experiment Study on Capillary Absorption of Fly Ash Concrete at Different Curing Ages

Experimental Investigation and Numerical Model for Chloride Diffusivity of Long-Age Fly Ash Cement Slurry

Artificial neural network modeling for the effect of fly ash fineness on compressive strength

Impact of particle size of fly ash on the early compressive strength of concrete: Experimental investigation and modelling

Service life of fly ash content concrete accompanying with chloride ion erosion under simulated load based on Comsol Multiphysics

The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model

Evaluation of Concrete Compressive Strength Prediction Using the Maturity Method Incorporating Various Curing Temperatures and Binder Compositions

A Mathematical Model for Predicting the Ultra-Early-Age Strength of Concrete