Abstract:To investigate the effect of curing temperature on creep behavior of fly ash concrete, the specific creep of concretes, with the water-binder ratio of 0.33 and different fly ash replacements of 20% and 40%, cured under temperatures of 20°C, 50°C and 90°C was examined. All concrete specimens were loaded at 33% of their compressive strength to measure the creep, when they had an equivalent cubic strength of (48.0±2.0)MPa. Based on the amount of non-evaporable water, the porosity and pore size distribution of hardened cement pastes, the scanning electron microscope (SEM) morphology of hydration products and X-ray diffraction (XRD) analysis, the influence of curing temperature on creep of fly ash concrete was analyzed. The results show that when concretes were loaded with the same stress level, the main factor influencing creep of fly ash concrete was the quantity and microstructure of C–S–H gel. Compared with the concrete with 20% fly ash dosage under the curing temperature of 20°C, the concrete cured under the temperature of 50°C produced more hydration products, with a slight decrease of Ca(OH)2, and the specific creep of which is close to the reference concrete. At the curing temperature of 90°C, concrete also produced more C–S–H gel, with a great decrease of Ca(OH)2, and the total specific creep after 360days is 87.1% of the reference concrete. The hydration products had a trend of crystallizing under temperature of 90°C and fly ash concrete produced a few hydration products of Tobermorite which could reduce the creep evidently. The concrete with 40% fly ash dosage under the cuing temperature of 50°C also produced more hydration products, but the specific creep of which increases significantly and is 119.5% of the reference concrete.

Influence of Fly Ash on the Compressive Strength of Concrete under Temperature Match Curing Conditions

Influence of Variable Temperature Curing on Mechanical Properties of Fly Ash Concrete

Performance of concrete containing fly ash at early ages

Effect of Thermal Environment at Early Age on Hydration Phases Composition and Strength Development of Concrete Containing Fly Ash

Influence of Fly Ash on the Mechanical Properties of Engineered Cementitious Composites Cured at High Temperature

Influence of Fly Ash on the Properties of Cement-Based Materials

Effect of Curing Condition on Compressive Properties of Concrete Subjected to Fire

Effect of Curing Temperature on Creep Behavior of Fly Ash Concrete

Influence of the dosage of fly ash on the adiabatic temperature rise of concrete

Some Factors Affecting Early Compressive Strength of Steam-Curing Concrete with Ultrafine Fly Ash

Experimental Analysis of Adiabatic Temperature Rise of Fly Ash Concrete

Effects of Curing Regimes on Strength Development of High-Strength Concrete

Assessment of Curing Efficiency and Effect of Moist Curing on Performance of Fly Ash Concrete

STUDY ON HYDRATION CHARACTERISTICS OF CEMENT PASTES CONTAINING FLY ASH SUBJECTED TO STEAM CURING

Effects of ultrafine fly ash on the properties of high-strength concrete

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Influence of Steam Curing on the Compressive Strength of Concrete Containing Supplementary Cementing Materials

The Effects of Curing Temperature on CH-Based Fly Ash Composites

Effects of Mixing and Curing Temperature on the Strength Development and Pore Structure of Fly Ash Blended Mass Concrete

Hydration, mechanical properties and durability of high-strength concrete under different curing conditions

Influence of Fly Ash to Concrete Porosity and Strength