Abstract:Concrete structures in cold regions are highly susceptible to internal cracks due to the periodic variation of temperature and the alternation of drying and wetting in the long term. Conventional damage detecting techniques for concrete are often destructive and need tedious manual operation. Concrete strain monitoring is a non-destructive measurement technique, which provides continuously streaming strain data and has the potential of detecting damage automatically based on a data-driven approach. Temperature-induced strains are highly responsive to damage to concrete structures under the freeze-thaw (F-T) cycles. In this regard, we propose a novel damage detection approach based on temperature-induced strains. The proposed method separates the temperature-induced component from the measured data based on the independent component analysis, which improves the modeling accuracy of the Gaussian processes modeling (GPM) approach for detecting damage. The principle of damage detection is extracting the features related to the damage from the measured strain data. The model residuals of temperature-induced strains are extracted as features that are sensitive to concrete damage. A novel damage index is established to determine the presence of structural damage based on the Kolmogorov Smirnov (KS) test, which estimates the probability distribution of residuals. To increase the reliability of damage detection and decrease the pseudo fault alarm rate, the general extreme value (GEV) theory is considered to determine a reliable threshold limit. A moving window strategy is introduced to perform damage detection and identify the damage occurrence time effectively. Monitoring data of the F-T cycle experiment are utilized to validate the proposed method. The results of three different damage cases demonstrate the effectiveness of the proposed data-driven method in terms of detecting the damage and identifying the damage occurrence time. The variation rules of the concrete temperature characteristics are revealed through the damage detection results under F-T cycles.

Nonlinear strain distribution in a field-instrumented concrete pavement slab in response to environmental effects

A Gaussian Processes-Based Approach for Damage Detection of Concrete Structure Using Temperature-Induced Strain

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Strain-based equivalent temperature gradient in concrete pavement and comparison with other quantification methods

Modelling of creep effect on moisture warping and stress developments in concrete pavement slabs

Fiber optic sensors enabled monitoring of thermal curling of concrete pavement slab: Temperature, strain and inclination

Characterization of moisture transport and its effect on deformations in jointed plain concrete pavement

Investigation of drying-induced non-uniform deformation, stress, and micro-crack propagation in concrete

Concrete Creep Modeling: Application to Slabs on Ground

Numerical Evaluation of Moisture Warping and Stress in Concrete Pavement Slabs with Different Water-To-Cement Ratio and Thickness

Calculation of shrinkage strain in early-age concrete structures---an example with concrete pavements

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Stress–strain Response of Soft Clay to Traffic Loading

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Modeling on Shrinkage Stress in Early-Age Concrete Pavements

Calculation of Shrinkage Stress in Early-Age Concrete Pavements. I: Calculation of Shrinkage Strain

Mechanism of moisture warping and deformation calculations in concrete pavements

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Experimental study on characteristics of bending cracks of compacted soil beams

New insights into strain evolution of concrete under different freeze-thaw conditions: Investigation based on real-time and full-field monitoring