Abstract:The main issues associated with cement concrete pavements are cracks and broken plates that affect driving comfort and road service life. To ensure sustainable use of the cement concrete, a buffer layer (AC-10) can be introduced between the base and the cement concrete panel. In this study, the interlayer shear test was performed, and the interlayer bonding coefficient under different temperature conditions was determined. The creep test of the buffer layer was also conducted, and the four parameters (E1, E2, η1, and η2) of the Burgers model of the buffer layer were analyzed using regression. According to the parameters obtained from the test, the finite-element model was established, and the moving load was applied to analyze the structural model response under high‐, medium-, and low-temperature conditions. The results show that the (1) temperature stress is mainly concentrated in the buffer layer and regions above the structural layer. At low temperatures, the maximum stress at the top of the surface layer is 2.16 MPa, and the vertical strain decreases as a function of depth. (2) Under the combined action of temperature and moving load, the variation ranges of tensile and compressive stresses at the top of the surface layer are the largest; the variation range of the buffer layer and the subsequent structure is small; the maximum warpage deformation of the surface layer is 0.453 mm under high-temperature conditions; and the maximum compression deformation is 0.219 mm under low-temperature conditions. (3) The comprehensive coefficient of the fatigue equation was modified, and the comprehensive coefficient of the fatigue equation under different vehicle speeds was proposed. This study provides a reference for the sustainable development of cement concrete pavements with buffer layers.

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Fracture Behavior of Asphalt Pavement with Cracked Base Course under Low Temperature

New Evaluation of Temperature Stress in Asphalt Concrete Pavements under Low Temperature

Investigation of Viscoelastic Properties of Polymer-Modified Asphalt at Low Temperature Based on Gray Relational Analysis

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

Study on Temperature Response of Rubberized Concrete Pavement Based on Fiber Bragg Grating Testing Technology

Influence of temperature and humidity coupling on rutting deformation of asphalt pavement

Temperature Stress of Roller Compacted Concrete Base of Durable Asphalt Pavement

Reinforcement Design of Composite Pavement Continuously Reinforced with Basalt Fiber Reinforced Plastics Bars

Influence of Fiber Type on Low-Temperature Fracture Performance of Presawed Asphalt Mixture Beams

Experimental Study on Pavement Performance of Basalt Fiber Asphalt Mixture

Structural Response of a Cement Concrete Pavement with a Buffer Layer to Temperature and Moving-Load Effects

Study on Low Temperature Cracking Resistance of Carbon Fiber Geogrid Reinforced Asphalt Pavement Surface Combined Body

Low-Temperature Cracking Analysis of Asphalt Pavement

Effects of moisture contents, fracture modes, and temperatures on fracture toughness and crack distribution of asphalt concrete at low-temperature

Influence of Temperature on the Mechanical Response of Asphalt Mixtures Using Microstructural Analysis and Finite-Element Simulations

The role of temperature differential and subgrade quality on stress, curling, and deflection behavior of rigid pavement