Abstract:The mechanical response of asphalt pavement under vehicular loading is an essential reference for crack-resistant pavement design. However, limited research focuses on the mechanical response measurement of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder. Therefore, two types of asphalt pavements were constructed. The first type of asphalt pavement uses a large-particle-size crushed stone base treated with fly ash and slag powder, where the slag powder uses granulated blast furnace slag powder. The second type uses a conventional cement-stabilized crushed stone base and serves as a reference structure. Firstly, the strain gauges and temperature sensors were installed during the construction of asphalt pavements. Secondly, the mechanical response of the pavement was tested at different speeds and service time conditions. Then, sensitivity analysis and three-factor analysis of variance (ANOVA) were carried out. Finally, the prediction equations were developed. The results show that the longitudinal strain pulse of the asphalt layer exhibited a “compression–tension–compression” characteristic. For the transverse strain pulse of the asphalt layer, the base layer’s transverse and longitudinal strain pulses were only shown as “tensile” characteristics. The vehicular speed significantly affected the strain values for the base and asphalt layers, showing a decreasing trend with increasing speed. For the asphalt layer, the strain values showed an increasing trend with increasing temperature; for the base layer, the strain values showed a decreasing trend with increasing service time. The type of base layer had a significant effect on the strain value. Compared with the conventional base layer, the large-particle-size crushed stone base treated with fly ash and slag powder had lower strain at the base layer and a lower position of the asphalt layer, which could better prevent bottom-up fatigue cracking. Finally, the strain prediction model of the pavement under the speed and temperature (service time) was fitted to obtain a model that can predict the mechanical response of the pavement under different operating conditions. The findings of this research can provide a reference for the design of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder.

Temperature Stress of Roller Compacted Concrete Base of Durable Asphalt Pavement

New Evaluation of Temperature Stress in Asphalt Concrete Pavements under Low Temperature

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Study on the Influence of Semi-Rigid Base Course Material on Asphalt Pavement Structure Combination Shrinkage

Investigation of thermal stress distribution in fiber-reinforced roller compacted concrete pavements

Study on Temperature Response of Rubberized Concrete Pavement Based on Fiber Bragg Grating Testing Technology

Effect of Asphalt Pavement Base Layers on Transverse Shrinkage Cracking Characteristics

Experiment and Representation of Stress Relaxation Behavior of Crumb Rubber Modified Asphalt

Study on Thermal Stress and Temperature Cracks Control of Longlin Roller Compacted Concrete Gravity Dam

Field Measurement and Analysis on the Mechanical Response of Asphalt Pavement Using Large-Particle-Size Crushed Stone Base Treated with Fly Ash and Slag Powder

Effect of crumb rubber and reclaimed asphalt pavement on viscoelastic property of asphalt mixture

Cracking Propagation of Asphalt Pavement of Stabilized Base with Inorganic Binder under Coupling of Overloaded Traffic and Temperature

Thermal Effect on Rheological Properties of Epoxy Asphalt Mixture and Stress Prediction for Bridge Deck Paving

Study on the consistency and mixture proportioning of roller compacted concrete for pavement

Influence of Service Conditions and Mix Design on the Physical–Mechanical Properties of Roller-Compacted Concrete for Pavement

Laboratory and Field Investigation of the Feasibility of Crumb Rubber Waste Application to Improve the Flexibility of Anti-Rutting Performance of Asphalt Pavement