Study on the consistency and mixture proportioning of roller compacted concrete for pavement

Siming LIANG,Ya WEI,Qianqian ZHANG,Jiliang FENG

DOI: https://doi.org/10.3969/j.issn.1002-3550.2014.01.042

2014-01-01

Abstract:Proposed a new mix design method to simultaneously obtain maximum dry density and suitable consistency of roller com-pacted concrete.Firstly,it investigated the influence of aggregate gradation,water content,fine aggregate ratio,cement content,and the content of fly ash on the consistency of roller compacted concrete (RCC);it established the relation between dry density and water con-tent based on the consolidated methods by vibration under a surcharge mass;finally,it tested the flexural strength and determined the final mixture proportion synthetically.The research results showed that aggregate gradation,fine aggregate ratio and water content were principle influencing factors of the consistency and the degree of compaction of RCC.When aggregate gradation was continuous,the fine-to-coarse aggregate ratio of the mixture was 50% by mass,the cement dosage was 15% of the aggregate mass,and the water content was 6% of the mass of the sum of all the dry ingredients,the modified vebe time (modified VC value) of RCC falls within the acceptable range of 35~45 s in engineering applications,and the RCC also exhibited high degree of compaction,and could achieve the flexure strength re-quired for the rural roads.Therefore,the new method is effective and feasible.