Studying the effect of the ratio of water to binder and sand to aggregate on the hardness of concrete mixtures and compressive strength of roller-compacted concrete by experimental method

Ngoc Tru Vu,,Van Lam Tang,
DOI: https://doi.org/10.31276/vjst.2024.0003
2024-06-29
Abstract:In roller-compacted concrete technology, withthe use of low water and cement content, the concrete mixture after kneading has high hardness and compaction equipment must be used to compact and shape the product.Therefore, the content of mixing water, binder, and aggregate are considered decisive factors, greatly affecting the properties of roller compacted concrete in both the fresh state and the hardened state.The paper uses the mathematical method of two-factor rotatable central compositional planning to simulate the effect of volumetric ratios of water-binder (VN/VCKD) and sand-aggregate (VC/VCL) on the objective functions of the test. The selected objective functions are the hardness of the concrete mixture and the compressive strength of the roller-compacted concrete at the age of 28 days.From the obtained objective functions, it is shown that both control variables VN/VCKDand VC/VCLhave a significant influence on the valuesof the experimental model. When the VN/VCKDratio increases, the water content contributes to increasing the plasticityand reducing the hardness of the concrete mixture. At the same time, excess water exists in the concrete mass in the form of air bubbles,pores,and magnetism. That reduces the compressive strength of the product. Furthermore, the VC/VCLratio of the aggregate that is too small or too large tends to cause the compressive strength of the concrete to decrease.
What problem does this paper attempt to address?