Study on Low Temperature Cracking Resistance of Carbon Fiber Geogrid Reinforced Asphalt Pavement Surface Combined Body

Zhiqiang Wang,Guangqing Yang,Xin Wang,Xunmei Liang,Mengfan Liu,Hao Zhang

DOI: https://doi.org/10.3390/polym16152168

2024-07-30

Abstract:Currently, there are limitations in the research on the use of carbon fiber geogrids to prevent low-temperature cracking in asphalt pavements. This study aims to comparatively investigate the effects of carbon fiber-based geogrid type and dense-graded asphalt concrete mixture (AC) surface combined body (SCB) type on the low-temperature cracking resistance of reinforced asphalt pavement through low-temperature bending damage tests. Two geogrid types were prepared: a carbon fiber geogrid (CCF) and a glass/carbon fiber composite qualified geogrid (GCF). Two SCB types were studied: AC-13/AC-20 and AC-20/AC-25. The results show that the improvement in the flexural tensile strength of CCF is similar to that for GCF. Moreover, under reinforced conditions, the improvement in the low-temperature cracking resistance of AC-20/AC-25 is better than that for AC-13/AC-20 by 16.26-24.57%. Based on the analysis, the reasonable ratio range of the aperture sizes to the major particle sizes in the dense gradation can achieve a more effective interlocking effect. This can improve the low-temperature cracking resistance of carbon fiber-based geogrid-reinforced samples. Then, increasing the bending absorption energy is a key way of improving the low-temperature cracking resistance of carbon fiber-based geogrid reinforcements. Eventually, the fracture type of carbon fiber-based geogrid-reinforced samples is a mixed plastic-brittle fracture. These results can provide a reference for the road failure analysis of geogrid-reinforced asphalt pavement.