Abstract:As the author has discovered in the pratice of the project design, the steel pipe size in the truss structure will increase with the expanded span of the spatial structure, far exceeding its original range of application. Therefore, the resulting effect of the joint additional moment on the steel pipe crossing nodes should not be ignored, and how to calculate the ultimate flexural capacity of the steel tubular joints has become an urgent problem to be solved in the joint design. However, the research on ultimate load-carrying capacity is mainly restricted in utilizing the current data and Code for Design of Steel Structures to analyze the axial load-carrying capacity, and the research on ultimate load-carrying capacity of the joint under additional moment is still inadequate. This paper, from the joint stiffness perspective, initiates with brief analysis of the effect of steel pipe size on the joint additional moment so as to illustrate the rationale and necessity for taking into account the joint additional moment in the steel pipe structure, and follows with the adoption of both three-dimensional four-joint 181 elastoplastic shell element and the finite element model (by which N-shaped circular steel pipe crossing nodes is established for the ideal elastoplastic material in ANSYS finite element program) to fit the formula for the flexural capacity of the N-shaped joints based on orthogonal test method and regression technique with geometric nonlinearity and material nonlinearity taken into consideration. It is designed to provide some reference for the design and application of steel tubular intersecting joints in the future.

Analysis on Influence Factors of Axial Strength of Circular Tubular TX-and TT-joints

Ultimate Strength of the Circular Tubular X-joints

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Influence of chord stress on axial strength of circular tubular TX-joints

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

RESEARCH ON THE BREAKAGE MODE AND ANALYTIC MODEL OF CIRCULAR TUBULAR X-JOINTS

Influence of Chord Stress on Axial Strength of Rectangular Tubular TX- and XX-joints

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints with Square Steel Tubes Subjected to Combined Axial Forces and Biaxial Bending Moments

Non-Linear Analysis of Ultimate Loading Capacity of Cast Tubular Y-Joints under Axial Loading

Non-linear Analysis on Axially Loaded Cast Tubular T-joints Including the Effects of Fillet Parameter

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

Experimental study of the static behavior of tubular N-joints

Simplified theoretical solution and practical calculation method for welded hollow spherical joints of rectangular hollow section members

Non-linear Analysis on Cast Tubular T-joint Loaded by In-Plane Bending

Nonlinear Analysis on Ultimate Flexural Bearing Capacity of the N-Shaped Steel Tubular Joints

NONLINEAR FINITE ELEMENT ANALYSIS FOR THE ULTIMATE STRENGTH OF MULTIPLANNAR TUBULAR JOINT

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes