Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental study on floor truss pinned connection in large-span steel structure

Experimental and analytical investigations on a large floor truss pinned connection

Experimental study on reinforcing moment connections for square steel tubes in National Swimming Center

Experimental study on the steel tube moment connections with modified cover-plated reinforcement

Sliding construction of prestressed long-span truss string structures

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Experimental Study on Bearing Capacity of Beam-Column Pin Joints in Long-Span Steel Structure Under Heavy Load

FINITE ELEMENT ANALYSIS OF FLOOR TRUSS PINNED CONNECTION IN STEEL STRUCTURE

Tensile Behavior of Novel Column-to-column Connection for Modular Steel Construction Using High-Strength Bolts

Structural design on multifunction hall of Shijiazhuang International Convention and Exhibition Center

Analysis and design on the steel structure of standard exhibition hall in Shijiazhuang International Convention and Exhibition Center

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental analysis of the truss-to-column connection in a modularized prefabricated steel structure

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Research on Key Joints Design of Mega Frame of the Shanghai Tower

Innovative Technique for Strengthening Steel Frame Articulated Joints in Restricted Conditions

Field Measurement and Analysis of Long Span High-level Steel Truss Transfer Story Structure

Design and Analysis of Large Span Spatial Steel Tubular Gymnasium Structure